Baltic, I am half way through this. I noted your advice not to let the piston drop whilst the saddle is removed (thank you!).
I have taken notice and am heeding your advice - but why? will the piston not pump back out?

all the best,

Click image to enlarge

Fluid will leak out

. Cheers, Greg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2011 Vogue SE 4.4 with lots of toys in Stornaway

Greg
Several members have reported difficulty recovering it to refit the top.
Mike. G reg 2.5VM Vogue Portofino red 1991- 1999
V reg 2.5td P38 Rioja red 1999- 2006
53 reg td6 Vogue Oslo blue 2006- 2015
11 reg 4.4 TdV8 Vogue SE. Baltic blue 2015- date.
https://www.fullfatrr.com/forum/topic56162...tty+affair

In case any use for someone .

Click image to enlarge

I have had an engineering firm make these - how beautiful is that!
You can probably guess how bored I am in Lockdown...

If it fits I will get the firm to make them and intro them to Stan etc so people can buy them pre-drilled.

Click image to enlarge

Click image to enlarge

 Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

Wow that is pretty special.

Mine is a bit more rudimentary, taking a "what's the fastest route from A to B" approach.

i.e. I didn't see much point of the disk element so how do I get a 16mm shaft to connect with a 28x58 odd mm hole.

So a 28x28x58 block of ally, drilled at the bottom, and a bit of excess cut off with an angle grinder to create the 'v' shape.
No welding, no machining (cordless drill too) so all done with hand tools if anyone wants to knock one up without much gear.

Click image to enlarge

Finished! just waiting for some 4mm slotted spring-pins to arrive.

these guys made the adaptor for me. Great job.

enquiry@anemboengineering.co.uk

Click image to enlarge

Click image to enlarge

The nice guys at Anembo engineering are now producing the adaptor for the Mercedes Sprinter Jack ready made and fully drilled. Which we need since Baltic Blue moved and doesn't have his pillar drill any more!!

https://www.ebay.co.uk/itm/Land-Rover-Rang...SwfR5fyiKZ

Last edited by Range Rover L322 on 4th Dec 2020 8:54pm. Edited 1 time in total

£24 quid is pretty good for such a thing

. Cheers, Greg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2011 Vogue SE 4.4 with lots of toys in Stornaway

Would have save me a lot of effort and I bet their result is not "a bit wonky" like mine.  2010 Range Rover TDV8 Baltic Blue Autobiography (2011 MY) - SOLD
1960 Land Rover SII SWB SW
2020 BMW R1250 RT LE
2021 Triton ST-125 (Monkey Bike)

New to the RR but noticed this thread. Interested in the bottle jack as my hydraulic one won't go high enough for this. Where can you get the Sprinter Jacks from, can't see on EBay. Presume the Sprinter one is the best option. Thanks for any pointers.

Search mercedes sprinter hydraulic jack

https://www.ebay.co.uk/i/284086083792?chn=...4129f441f0

https://www.ebay.co.uk/i/284086083792?chn=...4129f441f0

Perhaps both a bit on the pricey side. Cheers
Richard

(there are no such things as an ordinary FullFat, an ordinary cat or too many tools)
2011 TDV8 Vogue Santorini Black
Gap IIDBT

Thanks Richard, have found them! Yes bit pricey, will keep an eye out for some cheaper ones!

Welcome Ricardo

Also well worth while keeping an eye out in for sale on here, got mine from a member.  Cheers
Richard

(there are no such things as an ordinary FullFat, an ordinary cat or too many tools)
2011 TDV8 Vogue Santorini Black
Gap IIDBT