Advertise on fullfatrr.com »

Home > Maintenance & Mods (L322) > Bottle Jack Modification to replace Scissor Jack
Post Reply  Down to end
Page 7 of 10 <12345678910>
Print this entire topic · 
DrRob



Member Since: 16 Apr 2015
Location: Petersfield, Hampshire
Posts: 4300

United Kingdom 2011 Range Rover Vogue SE TDV8 Buckingham Blue

Mike - my thread will be using the Disco 2 bottle jack for roadside and SGS 3 tonne and adaptor for home work Thumbs Up Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

Post #539919 9th Jan 2020 11:02am
View user's profile Send private message View poster's gallery Reply with quote
muddycharles



Member Since: 05 May 2011
Location: Miami, FL
Posts: 89

United States 2008 Range Rover HSE 4.4 V8 Bonatti Grey
Doing the same








I am also going through this and purchased the Mini jackpad, had it machined and replaced the top. Pictures attached. Found a machine shop here in Miami and had them do the work. Not sure if it will work - so need to try it. 2008 HSE B. Grey
Overfinched
NavTV retrofit

Post #539972 9th Jan 2020 5:07pm
View user's profile Send private message View poster's gallery Reply with quote
pld118



Member Since: 25 Mar 2013
Location: Bairns
Posts: 4218

Scotland 2014 Range Rover Vogue SDV6 Santorini Black

Has anyone found a 'pad' that can be put on the bottle jack to make it L405 compatible (not used it since having L322s ans it's a waste)?

Apologies, if this is covered earlier in the thread/ just skim read so far.

Thanks

Thumbs Up

Post #539980 9th Jan 2020 6:39pm
View user's profile Send private message View poster's gallery Reply with quote
DrRob



Member Since: 16 Apr 2015
Location: Petersfield, Hampshire
Posts: 4300

United Kingdom 2011 Range Rover Vogue SE TDV8 Buckingham Blue

DrRob wrote:
supershuttle wrote:
I don't seem to have the option to upload pictures anymore it started but didn't finish, probably operator error Very Happy but when it comes back I will.
The key dimension is the rectangle viewed from the top should be 30mm x 55mm the 30mm is really tight but you could happily be a bit over on the 55mm - say 57mm maybe. Obviously if you get a measurement from someone who has bought the official BMW bit they would be the ones to use. Thumbs Up

Looks like 30mm is just right Thumbs Up
Going to order and then feedback. I have the SGS trolley jack..3tonne one
https://www.sgs-engineering.com/tj3x-3-ton-trolley-jack
Adaptor will sit nicely on the rubber pad that came with the jack Thumbs Up

Pad has arrived. Feedback shortly in a new “DrRob jacking thread”

 Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

Post #541203 20th Jan 2020 4:28pm
View user's profile Send private message View poster's gallery Reply with quote
Baltic Blue



Member Since: 13 Aug 2015
Location: North Wales
Posts: 3763

United Kingdom 2011 Range Rover Vogue SE TDV8 Baltic Blue

Just a tip Rob, but make sure not to let the piston drop whilst you have got the saddle removed






Mike. G reg 2.5VM Vogue Portofino red 1991- 1999
V reg 2.5td P38 Rioja red 1999- 2006
53 reg td6 Vogue Oslo blue 2006- 2015
11 reg 4.4 TdV8 Vogue SE. Baltic blue 2015- date.
https://www.fullfatrr.com/forum/topic56162...tty+affair

Post #541208 20th Jan 2020 5:51pm
View user's profile Send private message View poster's gallery Reply with quote
DrRob



Member Since: 16 Apr 2015
Location: Petersfield, Hampshire
Posts: 4300

United Kingdom 2011 Range Rover Vogue SE TDV8 Buckingham Blue

Mike. Thanks. This adaptor is for using with my trolley jack. Pad to pad if that makes sense. I have a Disco 2 bottle jack for roadside wheel changing under the lower suspension arms Thumbs Up
I’ll get some photos and thread sorted soon Thumbs Up Bow down Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

Post #541211 20th Jan 2020 6:14pm
View user's profile Send private message View poster's gallery Reply with quote
DrRob



Member Since: 16 Apr 2015
Location: Petersfield, Hampshire
Posts: 4300

United Kingdom 2011 Range Rover Vogue SE TDV8 Buckingham Blue

The pad fits perfectly in the sill slot Thumbs Up
This is the one I bought for reference. Same link as Greg's post earlier Bow down
https://rover.ebay.com/rover/0/0/0?mpre=ht...3884534748 Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

Post #541263 21st Jan 2020 7:55am
View user's profile Send private message View poster's gallery Reply with quote
M@r]{



Member Since: 03 Nov 2019
Location: Northants
Posts: 165

United Kingdom 2012 Range Rover Autobiography 4.4 V8 Barolo Black

Anyone any thoughts on whether this would fit?

https://www.amazon.co.uk/iFJF-Aluminum-Ano...s9dHJ1ZQ==

Post #542999 4th Feb 2020 1:53pm
View user's profile Send private message View poster's gallery Reply with quote
Bushy30



Member Since: 03 Jun 2018
Location: Oxfordshire
Posts: 1098

United Kingdom 2011 Range Rover Vogue SE TDV8 Galway Green

It'll fit the car, you need to mod it to fit the jack Current: 2011 FFRR Vogue SE 4.4 TDV8
Previous: -
2004 FFRR Vogue 4.4 V8 with LPG
1997 P38 4.0 SE with LPG
1997 P38 4.6 Vogue with LPG

Post #543001 4th Feb 2020 1:59pm
View user's profile Send private message View poster's gallery Reply with quote
Baltic Blue



Member Since: 13 Aug 2015
Location: North Wales
Posts: 3763

United Kingdom 2011 Range Rover Vogue SE TDV8 Baltic Blue

You don’t. need to drill it all the way through, just deep enough to get the pin back in.
Mine is held on with a galvanised nail, just bent slightly to hold it firmly in place.
Mike.

 G reg 2.5VM Vogue Portofino red 1991- 1999
V reg 2.5td P38 Rioja red 1999- 2006
53 reg td6 Vogue Oslo blue 2006- 2015
11 reg 4.4 TdV8 Vogue SE. Baltic blue 2015- date.
https://www.fullfatrr.com/forum/topic56162...tty+affair

Post #543006 4th Feb 2020 2:40pm
View user's profile Send private message View poster's gallery Reply with quote
darrenm



Member Since: 06 Jan 2015
Location: chorley
Posts: 182

United Kingdom 2010 Range Rover Vogue SE TDV8 Stornoway Grey

Has anybody found a good place to buy a jack they all seem expensive on eBay

Post #543025 4th Feb 2020 7:32pm
View user's profile Send private message View poster's gallery Reply with quote
M@r]{



Member Since: 03 Nov 2019
Location: Northants
Posts: 165

United Kingdom 2012 Range Rover Autobiography 4.4 V8 Barolo Black

Ok, my jack arrived the other day. £34.99 off eBay, brand new inc delivery. Rather than order the metal top a lot have done,
I thought I’d give a rubber one a try first, only £2.50 off eBay and a lot easier to drill Smile Anyway it arrived and got it to fit no problem. Should be kinder on the car too. I then ordered a small plastic tool box off Amazon, £5 delivered. All fits in quite nicely. So all in, brand new jack, new top to fit the FF and a box to keep it in and it all owes me just over £40 Smile Happy with that


Click image to enlarge






Post #544493 19th Feb 2020 9:53pm
View user's profile Send private message View poster's gallery Reply with quote
pcourtney



Member Since: 14 Jan 2020
Location: Stansted
Posts: 804

England 2011 Range Rover Vogue 4.4 V8 Sumatra Black

I found this in the back of our workshop today, a Weber Hydraulik 5 Ton bottle jack, I am going to file the ends off to have a flat surface and cut a 30mm x 55mm alloy rectangle 11mm thick or so, and weld it on for my L322




this is slightly differnet design to the newer ones, as the warehouse manager told me it's 15 years old to his knowledge





now to find a nice plastic box at home, put a torch in it, and some tools, and a bit of square wood to sit the jack on, and whatever else springs to mind

Post #557828 15th Jun 2020 6:57pm
View user's profile Send private message View poster's gallery Reply with quote
Pawl



Member Since: 07 Nov 2017
Location: West Midlands
Posts: 688

England 2007 Range Rover Vogue TDV8 Cairns Blue

I've just purchased a brand new 2 stage 2T bottle jack on ebay for £40+ postage - as I couldn't find a Sprinter jack at a reasonable price.




https://www.ebay.co.uk/itm/Telescopic-2-To...2749.l2649
The jack arrived this morning and seems good quality and shorter than I realised - ideal for transporting in the car.
I think it could be ideal to be used under the suspension arms - where you don't even need a massive lift to get a wheel / tyre off the ground for removal.
I'll be testing it shortly when the rain stops !

UPDATE : The jack works well, easy to lift a wheel off the ground.
The handle comes in 3 pieces to make the assy very compact. The centre section contains 2 bolts to retain each of the other pieces.
However, the jack top pad is quite small & not ideal to use under the relatively narrow front suspension arms - too easy for the arm to slip off. The pad isn't removable, so not a simple mod to add a RR jacking slot compatible pad.
The low overall height, also means the threaded top piece has to be spun out maybe an inch to minimise "wasted" movement before the wheel starts to lift.
I think I'll be trying to create an adapter for the top pad to improve location on a front suspension arm. Paul,
2001 Discovery 2 TD5, 211,000 miles & climbing
2006 FFRR TDV8 Vogue 145,000 miles & climbing
Member of Midland (Land) Rover Owners Club, www.mroc.co.uk

Post #558280 19th Jun 2020 5:22pm
View user's profile Send private message View poster's gallery Reply with quote
Range Rover L322



Member Since: 03 Sep 2019
Location: South West
Posts: 329

United Kingdom 

Duplicate deleted by author

Post #567883 23rd Sep 2020 10:47pm
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 7 of 10 <12345678910>
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site