Home > General > What Did You Do In Your Full Fat Today |
|
|
Danb_220_2019 Member Since: 02 Jan 2023 Location: Suffolk Posts: 262 |
Changed the rear right height sensor which appeared to have crapped itself since I replaced the drop links.
|
||
21st Apr 2023 11:26am |
|
Gremlin500 Member Since: 11 Mar 2022 Location: Newcastle, UK Posts: 1421 |
Fitted smoked grey sequential indicators to my L405, only £16 the pair from AliExpress, delivered in 3 weeks, They work great, fitted in minutes, more visible in daylight than the originals, and blend in very well with the Corris Grey mirrors, so IMHO they look better too, -result! “If it ain’t broke, don’t fix it” -where’s the fun in that? |
||
22nd Apr 2023 3:30pm |
|
TDV8_Tommy Member Since: 20 Feb 2019 Location: Pinoso, Valencia Posts: 397 |
First MOT in 4 years…passed with no advisories
|
||||||
22nd Apr 2023 5:16pm |
|
Bloke Member Since: 13 May 2019 Location: On the road to Oban Posts: 120 |
Another happy afternoon spent, 'fitting'. New front calipers went on nae bother, the N/S & O/S top outer piston were both frozen, so both were exchanged for the refurbished calipers and new Brembo pads fitted from stock. Noticeable improvement already even before the new pads are properly bedded in.
|
||||||||||||
23rd Apr 2023 4:43pm |
|
Bloke Member Since: 13 May 2019 Location: On the road to Oban Posts: 120 |
Further bonus, expect the fuel economy will rocket upwards as that N/S caliper was deffo binding, the outer pad was nearly worn out, while the inner pad was only half worn and the pads on the O/S caliper, were about equally half worn.
|
||||
23rd Apr 2023 8:07pm |
|
NobbyC Member Since: 29 Dec 2015 Location: Princes Risborough Posts: 122 |
Having decided to keep my 18 year old fatty for a few more years I got my friendly local indie to empty my wallet and treat the old girl to a full service including gearbox filter/ fluids as well as then replacing both top rear hub bushes, both front and rear callipers, disks and pads; replacing all four front lower arms and front roll bar links followed by a full steering and geometry alignment and air con replenishment.
|
||
16th May 2023 9:38pm |
|
xjsracer44 Member Since: 29 Nov 2010 Location: Hertfordshire Posts: 274 |
Just returned from 700 mile round trip to Tillieres in France to bring back a Daimler Double Six, four up & towing a trailer. My 2007 SC clocked up 180,000m on the trip & returned 20 mpg in comfort with no issues.
|
||
18th May 2023 6:38am |
|
PeteT80 Member Since: 25 Jan 2020 Location: Preston Posts: 208 |
Due to a warm oil smell under load uphills, I replaced the O rings on the turbo oil feed pipe. Using Viton BS611 O rings.
|
||||||
20th May 2023 1:54pm |
|
DaveK Member Since: 18 Oct 2013 Location: StHelens Posts: 790 |
Oil and filter today along with drain rear diff and replace oil. Bit surprised as there is no mention of rear diff ever being done in the service history or amongst the receipts I got when I bought it but the diff oil that came out at 93k was very clean. |
||
25th May 2023 4:54pm |
|
Baltic Blue Member Since: 13 Aug 2015 Location: North Wales Posts: 3763 |
Snap, oil and filter change for me today, plus changed both front wheels for brand new identical spares with new 255 55 20 Verdes fitted, and booked MOT for later in June.
|
||
25th May 2023 6:19pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35265 |
not today but a few days ago,
|
||||
26th May 2023 9:09am |
|
Danb_220_2019 Member Since: 02 Jan 2023 Location: Suffolk Posts: 262 |
Last night I changed both upper and lower arms on the nearside. Ball joint to do tomorrow.
|
||
26th May 2023 2:31pm |
|
Barmybrummie Member Since: 03 Apr 2021 Location: Somewhere in the valleys Posts: 653 |
Filled it up with all my belongings and left the missus. It's amazing how much stuff you can get it in the back of the fatty with the seats folded down
|
||
27th May 2023 10:08am |
|
Ajmngn Member Since: 25 May 2021 Location: Gloucestershire Posts: 191 |
Just a few little jobs that I’d been meaning to do for a while but never got round to it…
|
||
27th May 2023 9:04pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis