The mirror would have fitted (in fact did ) but there was no mounting for the sensor on my old one and the black surround (kinda dotted painted onto the screen) did not have the big dip in it. I'll remove the lot and take photos for the wiki as it only took ten minutes to add it all together and wire it up.

If you already have either light or rain sensors then it should be fine as the screen will already have the mounting clips in place. I believe the rain /light sensor itself is the same size but contains both sensors in one unit. Ash
------------------------------------------------------
2016 SDV8 AB

The sensor mount is just a silicone pad. Needs to be heated to 60+ deg C with a heat gun and attached when new. The surround can be done by paint (saw this in a BMW forum where the sensor was retrofitted) or black adhesive foil (as I'm doing). Haven't got to fitting yet...  
RRC 2Dr, RRC 4Dr,
P38, and 2 L322s
(wife thinks I'm nuts - prob right, too)

HI, heres the mirror surround, sorry comport this is going to hurt under a tenner
http://cgi.ebay.co.uk/BMW-E39-E46-E38-REAR...3f075e83a0 V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

Last edited by daveo on 24th May 2011 8:52pm. Edited 1 time in total

I thought there was a special part of the screen that magnified the light/rain so the sensor picked it up easier..?

Before the new screen came I just fitted it all together and put a small bit of bubble wrap in behind the sensor (so it pushed up to the screen) when I fitted the mirror surround back in place. It did work anyway but assumed there would be more on the screen. Doh... Ash
------------------------------------------------------
2016 SDV8 AB

OUCH Dave - that shot went straight through my wallet..

No worries mate - useful for others doing the upgrade though. Ash
------------------------------------------------------
2016 SDV8 AB

you have your new screen fitted now, did they change the A piller and top trims V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

Now I need the sensor - cheap as chips please lads! 

erm - no idea as I was at work. Left it wit SWMBO (big mistake). I phoned her when they had gone and asked if all was ok..? Her response.... I dunnow..!

Will have a look tomorrow and if they haven't I'll be calling them back. How will I know if they did or not though? Ash
------------------------------------------------------
2016 SDV8 AB

dan.... what type of rain sensor have you got on your screen, is it got the two big cells or the 6/8 little ones V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

mines got 6/8 if that's any help Dave...

Dan - You can have mine for £55..?  Ash
------------------------------------------------------
2016 SDV8 AB

hi yes so has my one but some come up with the 2 like matts
http://www.fullfatrr.com/forum/topic5964.html
he has posted some picks here at the above link...
the auto lights comes on the sensor with the 6/8 cells so if you have the other type you will need to change the mount... V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

you can get the replacement pads here
http://www.rejel.com/rejel-store/categoryi...10240.aspx V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

daveo wrote:

dan.... what type of rain sensor have you got on your screen, is it got the two big cells or the 6/8 little ones

From memory 4 I think? Two IR sendors Two recievers? 

so you will need to change your pad as well.. V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

comport, did they fit new trim's with your screen V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster