No idea what year model car the op has (fill details in ) but on the tdv8 ones at least a torch will shine thru the bottle and let you see what the float is doing



Dave 2010 3.6TDV8 Autobiography
Bas remap, Egr deleted (blanked & via remap) , Cold air intake, Turbo back exhaust, Provent 200 catch can, Banks idash gauge, 275/55/R20

GAP Diagnostics

Past - 02 & 03 TD6 And an 1984 Classic

I recently had mine swapped out for a new Genuine one as old one was just too dirty.
Coolant flushed and replaced with new coolant. I can now see the level clearer
I also used a Sharpie pen to highlight the min and max embossed levels on the outside of the bottle. Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

Thanks.My bottle is relatively clean but I can't see a float?Seem as I will have to replace. 2012 TDV8 Vogue SE 4.4

How do one remove the sensor?Do you loose fluid when you remove the sensor? 2012 TDV8 Vogue SE 4.4

Is there an easy way to try replacing the sensor without having to do the whole tank?

I am also having this problem, but as the sensor is only £5 I'd be tempted to try that if possible before disconnecting and removing the whole tank...

I have tried feeling around at the bottom of the sensor, but can't seem to find an easy way to pull it out. Is there enough room for it to come out with the tank in-situ?

I ended up replacing the bottle. 2012 TDV8 Vogue SE 4.4