fullfatrr.com - View topic - 4.4 TDV8 Top coolant pipe snapped the other connector…

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Mods (L322) > 4.4 TDV8 Top coolant pipe snapped the other connector…

Page 1 of 1

Print this entire topic ·

Ffrr-lover

Member Since: 04 May 2021
Location: Lincolnshire
Posts: 640

2012 Range Rover Vogue SE 4.4 V8 Santorini Black

4.4 TDV8 Top coolant pipe snapped the other connector…

I finally managed to get around to tackling the engine squeal I’ve had for far too long…
So today whilst the weather was acceptable i started dismantling various parts of the car to be able to remove the fan and cowling thereby gaining the access i need.

All well and good… except that whilst taking extra care removing the top coolant pipe without snapping the brittle connector… (like i did last time)

I instead ham fisted the other bloody end!

Click image to enlarge

I’ve tried to remove the pipe inside the top cooler hose and should be able to in time (the broken part inside is brittle), however i need to replace the connector at the other end.

Click image to enlarge

As far as i can tell it is from the Thermostat housing top outlet, which i can buy for around £60 (LR022690). However, the connector is behind a clip suggesting i can simply replace that? If so, does anyone know where i can find one? Currently driving: 2012 L322 SE Overfinch 4.4 tdv8

Past rides:
2014 Audi Q7 3.0d (good riddance)
2010 L322 Autobiography 5.0 Supercharged
2011 L320 HSE 3.0 sdv6
2014 Jaguar XF-RS 5.0 supercharged
2007 BMW 535D
2005 Mini Cooper S

https://www.fullfatrr.com/forum/topic59478.html

25th Feb 2023 12:54pm

Ffrr-lover

Member Since: 04 May 2021
Location: Lincolnshire
Posts: 640

So I am a little closer to what i need.

Click image to enlarge

The part circled in green is what I need but there is no reference that i can find to its part number or correct description. The pipe it attaches to doesnt seem to come with it. So I am still a little stuck here…

Hoping someone knows where i can get that part from… Currently driving: 2012 L322 SE Overfinch 4.4 tdv8

Past rides:
2014 Audi Q7 3.0d (good riddance)
2010 L322 Autobiography 5.0 Supercharged
2011 L320 HSE 3.0 sdv6
2014 Jaguar XF-RS 5.0 supercharged
2007 BMW 535D
2005 Mini Cooper S

https://www.fullfatrr.com/forum/topic59478.html

25th Feb 2023 4:23pm

JayGee

Member Since: 27 Jul 2021
Location: London
Posts: 3200

2012 Range Rover Vogue 4.4 V8 Orkney Grey

It’s not available as a separate part. You have to buy the whole unit that sits on the top of the thermostat housing. It’s out of stock everywhere and unlikely to be available anytime soon. Best bet is to get something made or make it yourself. 2012 TDV8 Vogue (L322)

25th Feb 2023 4:53pm

rjff

Member Since: 28 Oct 2017
Location: Cambridgeshire
Posts: 1196

2011 Range Rover Vogue TDV8 Santorini Black

I think you'll find the whole assembly needs to be purchased (8592A), that's what I did for mine.

I subsequently found that fuel line connectors seem to be similar so perhaps you could find one if not in too much of a rush.

Search

fuel line connector types

and look at the images

You could perhaps make a bend up as a temp repair from some form of tube or even a full replacement length of hose.

edit......... as above not currently available. Cheers
Richard

(there are no such things as an ordinary FullFat, an ordinary cat or too many tools)
2011 TDV8 Vogue Santorini Black
Gap IIDBT

25th Feb 2023 4:55pm

Ffrr-lover

Member Since: 04 May 2021
Location: Lincolnshire
Posts: 640

Cheers guys for the feedback. Indeed the assembly unit doesn’t appear to be available. Very frustrating.

However a quick search for “fuel line connectors” did yield some promising results!
https://www.ebay.co.uk/itm/165134704933?mk...media=COPY

I need to measure to ensure I get the right one, but now know they are bundy connectors! That may be a suitably easy fix Currently driving: 2012 L322 SE Overfinch 4.4 tdv8

Past rides:
2014 Audi Q7 3.0d (good riddance)
2010 L322 Autobiography 5.0 Supercharged
2011 L320 HSE 3.0 sdv6
2014 Jaguar XF-RS 5.0 supercharged
2007 BMW 535D
2005 Mini Cooper S

https://www.fullfatrr.com/forum/topic59478.html

25th Feb 2023 5:12pm

rjff

Member Since: 28 Oct 2017
Location: Cambridgeshire
Posts: 1196

Something along these lines if the hose sizes are correct.

https://www.ebay.co.uk/itm/2x-Fuel-Line-El...3316252983

https://www.ebay.co.uk/itm/175215557745?_t...%3A2047675 Cheers
Richard

(there are no such things as an ordinary FullFat, an ordinary cat or too many tools)
2011 TDV8 Vogue Santorini Black
Gap IIDBT

25th Feb 2023 5:12pm

Ffrr-lover

Member Since: 04 May 2021
Location: Lincolnshire
Posts: 640

Cheers for that rjff

I’ve pulled the snapped male out of the hose, and finally removed the piece that had snapped inside the female connector (that was a ball ache).

Click image to enlarge

My intention was to use the existing female with the new male, and you 2nd link with the elbow looks to be the right size to do just that …and if not I can at least replace my current female with the new one!

By my measurements the current male is between 7-9mm (inner to outer measurement) so assume that’s classed as an 8mm connector. Currently driving: 2012 L322 SE Overfinch 4.4 tdv8

Past rides:
2014 Audi Q7 3.0d (good riddance)
2010 L322 Autobiography 5.0 Supercharged
2011 L320 HSE 3.0 sdv6
2014 Jaguar XF-RS 5.0 supercharged
2007 BMW 535D
2005 Mini Cooper S

https://www.fullfatrr.com/forum/topic59478.html

25th Feb 2023 5:39pm

Ffrr-lover

Member Since: 04 May 2021
Location: Lincolnshire
Posts: 640

Just spotted that 9.89 is printed on my current connector which is the same as your link

I’ll order one up now. Appreciate your help Currently driving: 2012 L322 SE Overfinch 4.4 tdv8

Past rides:
2014 Audi Q7 3.0d (good riddance)
2010 L322 Autobiography 5.0 Supercharged
2011 L320 HSE 3.0 sdv6
2014 Jaguar XF-RS 5.0 supercharged
2007 BMW 535D
2005 Mini Cooper S

https://www.fullfatrr.com/forum/topic59478.html

25th Feb 2023 5:44pm

JayGee

Member Since: 27 Jul 2021
Location: London
Posts: 3200

Bit of brass or Ali tube and some jubilee clips would seem to be a practical replacement for that bit of plastic 2012 TDV8 Vogue (L322)

25th Feb 2023 5:47pm

rjff

Member Since: 28 Oct 2017
Location: Cambridgeshire
Posts: 1196

I hope that works, if it does great. Let us know. Cheers
Richard

(there are no such things as an ordinary FullFat, an ordinary cat or too many tools)
2011 TDV8 Vogue Santorini Black
Gap IIDBT

25th Feb 2023 7:21pm

Jayk69

Member Since: 08 Feb 2018
Location: Daventry
Posts: 601

2012 Range Rover Vogue 4.4 V8 Barolo Black

i had the same issue and replced it with this

i also replaced the crappy hose with a rubber one just cut it off the new unit. done 1000 miles and no issues 2012 Vogue 4.4 TDV8 - Current
2014 Navara V6 - Gone
2004 Vogue TD6 - Gone
Grand Cherokee - Gone
Discovery V8 (LPG) - Gone
Discovery TD5 - Gone

26th Feb 2023 11:45am

Ffrr-lover

Member Since: 04 May 2021
Location: Lincolnshire
Posts: 640

rjff wrote:
I hope that works, if it does great. Let us know.

As requested (albeit later than intended) the replacement clip worked perfectly! The only minor difference is the double disc of the original (which clips into a bracket) vs the single disc of the new one… but if you leave a slight gap where the hose meets the disc it slips into the bracket.

All in all a quick and cheap replacement

This…

Click image to enlarge

Vs this…

Currently driving: 2012 L322 SE Overfinch 4.4 tdv8

Past rides:
2014 Audi Q7 3.0d (good riddance)
2010 L322 Autobiography 5.0 Supercharged
2011 L320 HSE 3.0 sdv6
2014 Jaguar XF-RS 5.0 supercharged
2007 BMW 535D
2005 Mini Cooper S

https://www.fullfatrr.com/forum/topic59478.html

6th Mar 2023 5:53pm

Ffrr-lover

Member Since: 04 May 2021
Location: Lincolnshire
Posts: 640

Jayk69 wrote:
i had the same issue and replced it with this

i also replaced the crappy hose with a rubber one just cut it off the new unit. done 1000 miles and no issues

Cheers jayk69. Another simple fix, however I prefer the flip method I used simply to allow me to remove the top pipe without issue in the future. Especially if the plastic get brittle over time and decides to snap when needing to separate it! Currently driving: 2012 L322 SE Overfinch 4.4 tdv8

Past rides:
2014 Audi Q7 3.0d (good riddance)
2010 L322 Autobiography 5.0 Supercharged
2011 L320 HSE 3.0 sdv6
2014 Jaguar XF-RS 5.0 supercharged
2007 BMW 535D
2005 Mini Cooper S

https://www.fullfatrr.com/forum/topic59478.html

6th Mar 2023 5:58pm

johnboyairey

Member Since: 11 Jan 2013
Location: surrey
Posts: 2032

2012 Range Rover Westminster TDV8 Orkney Grey

im pretty sure I've seen this part used by others... check actual sizes, i guessed 1/4 pcl... its common on car workshop airlines. and easy to buy on eBay too. you screw in the male to the main body, and warm the plastic pipe and slide over the other end
, or clamp.
https://www.pclairtechnology.com/hose-tail...read-r-1-4

7th Mar 2023 1:09pm

Mfcetin

Member Since: 26 Jun 2023
Location: Nürnberg
Posts: 63

2011 Range Rover Vogue SE TDV8 Alaska White

Just to confirm that the correct size of the connector is this:

2011 Vogue SE 4.4 TDV8

15th May 2024 10:31am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum