Hi
With the recent rain facilitating, my auxiliary belt has come off, MY12 TDV8 and with the 80k+ on the clock was taking a view while going to the trouble of replacing the belts (Fan, cowling, under trays, poss aircon pipes +++) I might as well look at changing the numerous pulleys.
Does this sound sensible & driveway do-able?

I've just had mine replaced by an independent specialist. Mine was making a squeaking noise when started from cold. Initially I was just thinking of replacing the tensioner but I was advised that it would make sense to replace the belt & all pulleys at the same time. I understand there is quite a lot to strip off so seemed sensible given I'm planning on keeping her. I think he charged 3 or 4 hours labour & I understand it is time consuming rather than difficult so should be doable on the drive. Mines just turned 86k miles. Good luck.

Same here. Squeaks when cold. Being done in 2 weeks by local garage. Can’t be doing it myself. Easier to do on my ‘93 Classic which I can handle
PS Nice diagram and you get forum discount https://www.advancedfactors.co.uk/auxiliar...1791-c.asp Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

https://www.fullfatrr.com/forum/topic48934...=tensioner Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

Thanks, DrRob & Philip, had an on & off squeak last 6 months + a rattle, looking to replace 2 belts and 5 pulleys!
LR024791 - Fan Pulley
LR025083 - 80mm idler
LR022953 - 65mm Idler
LR022809 - Tensioner Pulley
LR025988 - Pulley
LR022803 - Belt
LR022804 - Belt
All ordered for the weekend £311 all in,
So apart from the usual bag of spanners, before I roll my sleeves & up is there anything you think I may have missed or should replace while the fan etc are out the way? (apart from a new set of knuckles)

Hi, that's the 7 parts they've used on mine so you should have all you need other than antifreeze. I think it is easy to break the plastic tee piece coolant pipe on the top hose so be careful with that & good luck. Weather forecast for the weekend is good

Be aware the tensioner is pretty easy so is the nearby idler....

Getting the belt off and getting to the other pulleys 🤷‍♂️ Not so much.....  There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

Quick update...Parts have just arrived, didn’t make it for the weekend (couple of working days to get the LR parts in) So just spent time making some access. Also cleaning the throttle body, shamefully full of gunk.

There is a bit of space from the top where it looks like I can get access from the top to fit 3 of the pulley’s Just need a bit of daylight to start. The 9-5 day job not helping!

Click image to enlarge

it is transmission cooler, take those two bolts out and drop culer down ( do not disconnect pipes). 2012 TDV8 Black Edition
2000 Disco. TD5
1975 series III

Sorry, I was trying to add a picture from the WM. G reg 2.5VM Vogue Portofino red 1991- 1999
V reg 2.5td P38 Rioja red 1999- 2006
53 reg td6 Vogue Oslo blue 2006- 2015
11 reg 4.4 TdV8 Vogue SE. Baltic blue 2015- date.
https://www.fullfatrr.com/forum/topic56162...tty+affair

Yep as above G.box cooler. Don’t take the hoses off, but it should be poss to unbolt and push to one side👍🏻 There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

Thanks Nimo & Northernmonkey, oil cooler unbolted last night, bit more room for knuckles now!!
Now to the fan shroud later, & the left hand side pulleys. Don't suppose anyone has anything about the fan & shroud removal. Looks to have a lot of bolts along all sides & a couple of electrical connectors, hoping just a case of undoing these these and easing it up & out with the fan.

Plato69, I did same thing 2~3 months ago and it is very fiddly job, I am not very good on posting PDF files so if You ask Baltic Blue (Mike) to post PDF for cooling fan removal it will greatly help You to do the job. if You are doing it on a driveway You may consider some sort of ramps, I use this home made.

 2012 TDV8 Black Edition
2000 Disco. TD5
1975 series III