Home > Technical (L322) > 4.4 TDV8 MAP sensor |
|
|
Baltic Blue Member Since: 13 Aug 2015 Location: North Wales Posts: 3772 |
I doubt yours will be dirtier or more blocked up than either mine or NMJ's and neither of us have reported any restricted performance alarms, so I doubt it. G reg 2.5VM Vogue Portofino red 1991- 1999
|
||
4th Jul 2017 11:16am |
|
Baltic Blue Member Since: 13 Aug 2015 Location: North Wales Posts: 3772 |
Nino Nino,
|
||
4th Jul 2017 4:31pm |
|
northernmonkeyjones Member Since: 24 Mar 2012 Location: derby Posts: 8523 |
I need to re arrange some of the pipework in this area.... the feed coming off the rad hose which goes to the left hand of the green circles, is the wrong side of the other hose, which is then chaffing on the engine cover. Good to know this push fit connection can be taken off cos I can then put it back in the right place so it sits in the channel on the foam padding
|
||
4th Jul 2017 6:57pm |
|
stu Member Since: 04 May 2011 Location: Richmond North Yorkshire Posts: 927 |
Battery disconnection it is first then. How do I get the lager to Bosnia if your right? Will Hekwap do?... Current: TDV8 (3.6) RRS HSE
|
||
4th Jul 2017 7:24pm |
|
nino_nino Member Since: 29 Mar 2015 Location: pocitelj Posts: 690 |
Hekwap will do just fine stu
|
||
4th Jul 2017 8:18pm |
|
GraemeS Member Since: 06 Mar 2015 Location: Wagga area Posts: 2485 |
Mine too! |
||
4th Jul 2017 8:53pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35326 |
done mine today and it was clogged up like all yours..
|
||||
5th Jul 2017 11:37am |
|
Baltic Blue Member Since: 13 Aug 2015 Location: North Wales Posts: 3772 |
I found this link posted by rar110 helpful.
|
||
5th Jul 2017 11:43am |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35326 |
thank you mike...i should really have read the thread again ... - .- -.
|
||
5th Jul 2017 11:46am |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35326 |
so would a clogged up sensor really make that much of a difference in the performance of this engine...anyone found the engine more responsive after a clean... ... - .- -.
|
||
5th Jul 2017 11:59am |
|
Baltic Blue Member Since: 13 Aug 2015 Location: North Wales Posts: 3772 |
I cleaned mine at the weekend then had the 80mph cough software update done on Monday so I can't really say which had the most effect, but it was certainly running well yesterday.
|
||
5th Jul 2017 12:25pm |
|
mpirie Member Since: 26 Jun 2012 Location: In the Highlands Posts: 898 |
I don't think it would make much difference Stan. As it's a pressure sensor, providing it's not sealed from the pressure in the inlet manifold, then having soot all over it would only have a minimal effect. |
||
5th Jul 2017 12:43pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35326 |
looking forward to your report mike #1 ..
|
||
5th Jul 2017 1:09pm |
|
nino_nino Member Since: 29 Mar 2015 Location: pocitelj Posts: 690 |
O she does, |
||
6th Jul 2017 10:57am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis