Had the same problem, now solved thanks to this site  2010MY TDV8 Vogue Nara bronze / Arabica, Ivory. VW Amarok 2013 180 auto
Swedish LR club member #5333

Top tip thread. Same issue here on my 2010 FFRR 5.0. 20 minutes later after a bit of cack handed soldering job-jobbed.

Thanks guys

 All my spelling errorz are belong to me!

2023 FFRR L460
2021 AM new Vantage

Land Rover technical bulletin LTB00416v3 covers this fault.

A wiring overlay is available with a modified boot\grommet to prevent the fault reoccurring.

The part number is LR032839

It is recommended that both wires are replaced at the same time

The bulletin lists a totL labour time of 0.2 hours.

Just had the same on mine, fixed in 30 mins with some soldering and re-taping. Thanks to all for the invaluable advice!  SDV8 AB MY 2019
SDV8 VSE MY 2015 - Gone
5.0 S/C AB MY 2010 - Gone
4.2 S/C VSE MY 2006 - Gone

Same fault here. soldered and tape it, job done.
wish all faults were that easy.

Had the same problem on my 2011 TDV8 this week. Solved in 10 minutes thanks to this forum

Same thing here yesterday...problem solved in 10 minutes!!!

Thanks guys!

JJ

Same thing happened again last week and the original wire has snapped at the point it enters the rubber grommet at the top of the strut. Bit the bullet and got a replacement part (LR Part LR032839). Piece of pee to fit and all done in 15 mins. And they have improved the quality of the wire significantly. By the way the kit comes with crimp connectors for joining to the old loom.

Just waiting for the other side to go now!  SDV8 AB MY 2019
SDV8 VSE MY 2015 - Gone
5.0 S/C AB MY 2010 - Gone
4.2 S/C VSE MY 2006 - Gone

anyone know of a module or fuse for the adaptive dynamics in a 2010 RR SC? I eliminated the intermittent fault about 6 months ago by replacing the wires to the shock towers however after 2 weekends of heavy wheeling the dynamics fault is back and is constant. I checked wires and seem okay. any help here is appreciated. BTW this photo is from the 2015 SCARR rally and it was a blast.

Just had mine go too

10 mins with soldering iron under the bonnet and all sorted

Will get the replacement parts from Dan the man shortly.

Just had the same problem with mine.

Many thanks to the forum members for your info on how to resolve the problem.

Appreciated.

Me too

just had a look at mine and they have fitted the updated parts to the 2012, the wires coming into the rubber grommets aren't wrapped in tape, they are a thicker rubber cable. so hopefully this won't be a problem  There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2021 Discovery 5 D300 MHEV commercial

What a poor design.
I've just looked at the same area on my jag (which has dynamic ) and its the same?
Come on land rover - sort this out!
My advice to everyone is fix this before it breaks - because it will eventually!