Home > Technical (L322) > TD6 2002 wont start |
|
|
Batpooh Member Since: 28 Jan 2014 Location: Aylesbury Posts: 13 |
Hi All first post and as usual its a cry for help
|
||
2nd Feb 2014 7:40pm |
|
KurtVerbose Member Since: 08 Aug 2010 Location: Les Arses Posts: 5848 |
That's a good way of describing the problem - with a video.
|
||
2nd Feb 2014 8:21pm |
|
nicedayforit Member Since: 11 Jun 2011 Location: Beside the Solway Posts: 3969 |
To eliminate gear selector cable stiffness / corrosion holding off the gearbox inhibitor switch I would be inclined to lubricate the cable as per the link below,
|
||
2nd Feb 2014 8:42pm |
|
Joe90 Member Since: 29 Apr 2010 Location: Hampshire Posts: 6407 |
Video very handy.
|
||
2nd Feb 2014 9:17pm |
|
Joe90 Member Since: 29 Apr 2010 Location: Hampshire Posts: 6407 |
Easiest thing to do is unplug it and see what happens?
|
||
2nd Feb 2014 9:45pm |
|
wats39 Member Since: 08 Jul 2012 Location: fife Posts: 77 |
Could it be a bad earth? Try putting a jump lead from the negative on the battery to the engine. '04 td6 se
|
||
3rd Feb 2014 10:55pm |
|
Batpooh Member Since: 28 Jan 2014 Location: Aylesbury Posts: 13 |
Sorry for the delay,
|
||
9th Feb 2014 10:58am |
|
nicedayforit Member Since: 11 Jun 2011 Location: Beside the Solway Posts: 3969 |
When you first lock the car you could see 6-7A being drawn from the battery, possibly slightly more of the FBH has been running whilst it goes thro its purge cycle.
|
||
9th Feb 2014 11:24am |
|
Batpooh Member Since: 28 Jan 2014 Location: Aylesbury Posts: 13 |
So i should get a reading of 0.03 amps on the fluke
|
||
9th Feb 2014 12:14pm |
|
wats39 Member Since: 08 Jul 2012 Location: fife Posts: 77 |
Still think its a bad connection somewhere. If you look at the instrument panel the only light thats flashing is the oil light which points the problem towards the engine side of things in my opinion. The relay thats ticking in the engine compartment is the glowplug relay which draws quite a bit of current. Double check all your main earth and power cables for good connections. Check the main fuses by pulling them out and checking their terminals are clean etc. Remember to disconnect the battery first though. If it were the ignition switch then i would imagine all the warning lights would be flashing???? Good luck '04 td6 se
|
||
9th Feb 2014 11:00pm |
|
kingpleb Member Since: 07 Jun 2011 Location: Maybe here. Maybe there, I get everywhere! Posts: 8455 |
Try this,
|
||
10th Feb 2014 12:35pm |
|
Noddysvogue Member Since: 01 Feb 2014 Location: Blackpool Posts: 4 |
Hi Stuart I've noticed the hill decent is lit on your clocks has it always done that as mine doesn't light on start
|
||
18th Feb 2014 7:36pm |
|
Bob the B Member Since: 10 Jun 2011 Location: Newcastle upon Tyne Posts: 163 |
As Ian says and also the oil light is flashing, dont think mine flashes like that.
|
||
19th Feb 2014 4:22am |
|
Batpooh Member Since: 28 Jan 2014 Location: Aylesbury Posts: 13 |
Hi Folks
|
||
21st Feb 2014 6:11pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis