Advertise on fullfatrr.com »

Home > Maintenance & Mods (L322) > 2012 TDV8 Disconnect battery to trickle charge?
Post Reply  Down to end
Page 1 of 2 12>
Print this entire topic · 
Epson Green



Member Since: 20 Mar 2021
Location: Sutton Coldfield
Posts: 110

United Kingdom 2012 Range Rover Westminster TDV8 Orkney Grey
2012 TDV8 Disconnect battery to trickle charge?

It has been 8 weeks since I used the RR and not surprisingly the battery is struggling to crank the motor into life.

I have an Absar AGM trickle charger but I am unsure wether battery disconnection is necessary for trickle charging. I see the official LR advice is disconnection and removal but I assume this is for charging at high amps.

I have seen posts describing charging through the tow bar socket which sounds like a good idea, however I don’t have a link cable yet, but this should be easy enough to make up for the future.

But for now can I connect direct to the battery without disconnecting the battery?

Many thanks,

Kevin

Post #652425 3rd Jan 2023 12:00pm
View user's profile Send private message View poster's gallery Reply with quote
Weegie



Member Since: 09 Jun 2014
Location: East Sussex
Posts: 3233

Scotland 2008 Range Rover Vogue TDV8 Stornoway Grey

Yes in a word. Do it whenever I need a top-up John
2008 Stornoway Grey 3.6 Tdv8 Vogue
2005 TD6 Java Black Vogue - Written off!!
GAP iiD BT
2003 Discovery TD5 Auto, Nanocom Evolution - gone to a new home!
MasseyFerguson 152 - No electronics!! - Sold

Post #652426 3rd Jan 2023 12:10pm
View user's profile Send private message View poster's gallery Reply with quote
pcourtney



Member Since: 14 Jan 2020
Location: Stansted
Posts: 803

England 2011 Range Rover Vogue 4.4 V8 Sumatra Black

yes, I use a CTEK MXS 5 and put it on when I am away for a week or so, it is peace of mind for me, but I am lucky in that the power socket is very close to my engine bay when I park at home

Post #652429 3rd Jan 2023 12:32pm
View user's profile Send private message View poster's gallery Reply with quote
DrRob



Member Since: 16 Apr 2015
Location: Petersfield, Hampshire
Posts: 4298

United Kingdom 2011 Range Rover Vogue SE TDV8 Buckingham Blue

I use a Ctek via my 13 pin tow socket using an adaptor I purchased from the forum shop.
Easy way to top up battery.
Currently unavailable from forum shop Big Cry Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

Post #652432 3rd Jan 2023 12:44pm
View user's profile Send private message View poster's gallery Reply with quote
Epson Green



Member Since: 20 Mar 2021
Location: Sutton Coldfield
Posts: 110

United Kingdom 2012 Range Rover Westminster TDV8 Orkney Grey

Many thanks for the replies, makes the job that much easier if battery disconnection is not necessary.

I am going to look into making up a link lead to charge via the tow electric socket, it must be straight forward - just the permanent +/- pins to identify. Kevin
2012 L322 Westminster 4.4 TDV8
1999 P38A 4.0 SE - Sold

Post #652436 3rd Jan 2023 1:09pm
View user's profile Send private message View poster's gallery Reply with quote
mjdronfield



Member Since: 04 Nov 2011
Location: Derbyshire
Posts: 7774

United Kingdom 2011 Range Rover Vogue SE TDV8 Buckingham Blue

I attach a CTEK to the white towing socket with the adapter that was in the site shop.

No issues over the years.

Thumbs Up 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

Post #652448 3rd Jan 2023 2:48pm
View user's profile Send private message View poster's gallery Reply with quote
V8 Bob



Member Since: 15 Mar 2018
Location: Cumbria
Posts: 356

United Kingdom 2012 Range Rover Westminster TDV8 Ipanema Sand

On a 13 pin plug 3, 11 and 13 are earths, pin 9 is permanent live.

Plenty of diagrams if you Google it, I made one with a 13 pin trailer socket into a connection box screwed to a piece of wood, just clip charger on or multi gauge if I want to see battery condition 2012 tdv8 Westminster arrived Jan 19 gone Dec 23

200 TDi discovery bobtail gone
RR classic v8 bobtail gone
300 tdi Discovery 3 dr gone

Post #652451 3rd Jan 2023 3:49pm
View user's profile Send private message View poster's gallery Reply with quote
Epson Green



Member Since: 20 Mar 2021
Location: Sutton Coldfield
Posts: 110

United Kingdom 2012 Range Rover Westminster TDV8 Orkney Grey

Hi Bob, thanks for the heads up on the pins. Do all three earths need connected to the trickle charger, or is a case belt and braces? Kevin
2012 L322 Westminster 4.4 TDV8
1999 P38A 4.0 SE - Sold

Post #652453 3rd Jan 2023 4:16pm
View user's profile Send private message View poster's gallery Reply with quote
Strider



Member Since: 08 Jun 2015
Location: Hertfordshire
Posts: 500

England 2007 Range Rover Vogue SE 4.2 SC V8 Zermatt Silver

mjdronfield wrote:
I attach a CTEK to the white towing socket with the adapter that was in the site shop.

No issues over the years. Thumbs Up


+1 Topped up once a week.

Post #652466 3rd Jan 2023 7:37pm
View user's profile Send private message View poster's gallery Reply with quote
IGP



Member Since: 09 Jul 2020
Location: Malvern
Posts: 284

United Kingdom 2013 Range Rover Vogue SE SDV8 Siberian Silver

Epson Green wrote:
Hi Bob, thanks for the heads up on the pins. Do all three earths need connected to the trickle charger, or is a case belt and braces?


Pin 9 positive, pin 13 negative

HTH
Ivan 2013 Vogue SE SDV8
2013 Freelander 2 SD4 HSE Luxury

Post #652481 4th Jan 2023 8:37am
View user's profile Send private message View poster's gallery Reply with quote
Epson Green



Member Since: 20 Mar 2021
Location: Sutton Coldfield
Posts: 110

United Kingdom 2012 Range Rover Westminster TDV8 Orkney Grey

Thanks Ivan for the confirmation 👍👍 Kevin
2012 L322 Westminster 4.4 TDV8
1999 P38A 4.0 SE - Sold

Post #652487 4th Jan 2023 9:52am
View user's profile Send private message View poster's gallery Reply with quote
Warkman



Member Since: 05 Dec 2017
Location: Warwickshire
Posts: 13

United Kingdom 2012 Range Rover Vogue TDV8 Orkney Grey

I need to put some charge into the battery (4.4 TDV8 2012) as it’s come up with engine error
Looking at the battery in situ it’s not easy to see the terminals in where the battery sits.
What do others do when needing to charge? I have a cetek mx7

Many thanks

Post #654127 20th Jan 2023 10:43am
View user's profile Send private message View poster's gallery Reply with quote
Baltic Blue



Member Since: 13 Aug 2015
Location: North Wales
Posts: 3760

United Kingdom 2011 Range Rover Vogue SE TDV8 Baltic Blue

I have permanently wired a Ctek socket lead to the rear fusebox and just thread it through the lower tailgate corner so it isn’t trapped when I close the tailgate, then I leave the Ctek Sat on the rear bumper ledge, simple.
Mike.

 G reg 2.5VM Vogue Portofino red 1991- 1999
V reg 2.5td P38 Rioja red 1999- 2006
53 reg td6 Vogue Oslo blue 2006- 2015
11 reg 4.4 TdV8 Vogue SE. Baltic blue 2015- date.
https://www.fullfatrr.com/forum/topic56162...tty+affair

Post #654132 20th Jan 2023 12:42pm
View user's profile Send private message View poster's gallery Reply with quote
jaguar3



Member Since: 25 Sep 2022
Location: Estonia
Posts: 193

Estonia 2011 Range Rover Vogue SE 4.4 V8 Baltic Blue

I install small DEFA Multicharger. Good thing when use Webasto and drive short trips. Just plug in for the night and battery is always full.

Post #654452 23rd Jan 2023 11:29am
View user's profile Send private message View poster's gallery Reply with quote
KristoffL322



Member Since: 20 Jun 2022
Location: North West
Posts: 27

United Kingdom 2012 Range Rover Westminster 4.4 V8 Orkney Grey

I've just fitted a ctek hard wire kit so I can plug in my ctek charger without lifting the hood. Took about 30 mins to do and most of that we extending the ctek wiring as it didn't reach the grill from the battery, no need to remove any parts of the car to run it how I have, not even the grille, you can fish it though with your fingers very easily. Blue line shows the cable run. Ignore the croc clips and block of wood on the battery, I took this photo when I was checking for parasitic draw with my multimeter.







Click image to enlarge



Click image to enlarge



Click image to enlarge

Post #654501 23rd Jan 2023 6:04pm
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 1 of 2 12>
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site