Obviously been a bit chilly in the UK this week. I set my car via the I control app to preheat for 30 mins before going out this morning. Car was nice and warm, windscreen had defrosted etc which was all great… but my drivers door was as fully iced shut and only some determined pulling mixed with some lukewarm water did the trick.

I’ve owned loads of different cars over the years in some really cold weather but I’ve never had a door feel liked it’s been welded shut by ice! Is this normal for an L405 or do I have a seal issue or something?

L322 does the same. Gummi pledge (think that’s it) or similar, on the rubber seals to stop them sticking.

 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

I’ve always used spray silicone (Halfords, Amazon etc), onto a cloth and wipe all rubber seals, it protects and prevents sticking. And, a spray on the hinges and into the door catch mechanism also helps. Used it for years.

ive always just put a light coating of a light oil (WD40 type) with a cloth on the seals of all my cars. Always worked, never any issues. First time FFRR owner

Thanks for reminding me  2018 SE SDV8 4.4 Byron Blue

Thanks for the info on the Gummi Pledge, at least I now know it is not a Haribo product

I had the same issue this morning trying to open my L405 doors. Tonight applied Gummi Pflege Stift. It is excellent stuff and after using my current bottle for a decade, I have ordered a new bottle from Amazon for £12.95 delivered  "There is no replacement for displacement" - W O Bentley