fullfatrr.com - View topic - Permanent fix for leaking throttle body pipe

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical (L322) > Permanent fix for leaking throttle body pipe

Page 1 of 3

Print this entire topic ·

Furnitureman

Member Since: 26 Jan 2021
Location: Leicestershire
Posts: 345

2012 Range Rover Westminster 4.4 V8 Cairns Blue

Permanent fix for leaking throttle body pipe

Like nearly all 4.4 TDV8 owners the rigid plastic connector to the throttle body is leaking, it’s an awful design from the start and most look like this after several thousand miles

Click image to enlarge

The problem is the seal inside really isn’t upto the job and the fit is so loose it’s comical it ever got past the design stage, I’ve been thinking for a while how to solve this issue and I think I’ve done it, this is my connector 2000 miles after the fix

Click image to enlarge

The fix is so simple and costs under £20 and doesn’t involve PTFE tape, to fix this irritating issue you will need the following

Small flat blade screwdriver
7mm socket
3 75mm int diameter 3mm O Rings

To start remove the rubber intercooler pipe using the 7mm socket
Then undo the clamp on the small pipe top right of the connector and remove the pipe
Next in clip the electrical connector bottom left of the pipe
Finally pull out the metal retaining clip and remove the connector
This is what it looks like inside

Click image to enlarge

The seals are usually misshaped and don’t form a great seal, just in front of the seal is a rigid plastic retaining ring to remove this use the small flat bladed screwdriver to pop the retaining lugs inwards like in the picture below

Click image to enlarge

You can put the rigid retaining ring aside, next get the three 75mm O rings and slide them over the metal throttle body then fit the original seal as below

Click image to enlarge

Finally re fit the rigid plastic part, re connect the plug and pipe and re fit the intercooler pipe, after 2000 miles mine is as clean as the day I did the repair

Hope this helps others if you do a search on eBay you will find the o rings 2012 Range Rover Westminster 4.4 TDV8
2006 Discovery 3 HSE 260k miles and still going strong with a new owner

8th Dec 2022 8:58pm

GraemeS

Member Since: 06 Mar 2015
Location: Wagga area
Posts: 2471

2012 Range Rover Autobiography TDV8 Bournville

I tried a single 3.125" ID x 5mm in the housing but it was too thick so will try a 3.125" x 1/8" next time.

8th Dec 2022 9:15pm

Furnitureman

Member Since: 26 Jan 2021
Location: Leicestershire
Posts: 345

Try the fix above it works 2000 miles later no leaks it’s a simple fix 2012 Range Rover Westminster 4.4 TDV8
2006 Discovery 3 HSE 260k miles and still going strong with a new owner

9th Dec 2022 6:55am

Ffrr-lover

Member Since: 04 May 2021
Location: Lincolnshire
Posts: 640

2012 Range Rover Vogue SE 4.4 V8 Santorini Black

Looks good!

The rigid plastic retaining ring that’s popped out. Do you refit that, or leave it out? I suspect it is no longer needed, but want to be sure… Currently driving: 2012 L322 SE Overfinch 4.4 tdv8

Past rides:
2014 Audi Q7 3.0d (good riddance)
2010 L322 Autobiography 5.0 Supercharged
2011 L320 HSE 3.0 sdv6
2014 Jaguar XF-RS 5.0 supercharged
2007 BMW 535D
2005 Mini Cooper S

https://www.fullfatrr.com/forum/topic59478.html

9th Dec 2022 7:49am

DrRob

Member Since: 16 Apr 2015
Location: Petersfield, Hampshire
Posts: 4302

2011 Range Rover Vogue SE TDV8 Buckingham Blue

Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

9th Dec 2022 8:09am

JayGee

Member Since: 27 Jul 2021
Location: London
Posts: 3200

2012 Range Rover Vogue 4.4 V8 Orkney Grey

Mine isn’t leaking but will do this mod anyway - many thanks! 2012 TDV8 Vogue (L322)

9th Dec 2022 8:38am

GraemeS

Member Since: 06 Mar 2015
Location: Wagga area
Posts: 2471

Mine's not leaking but I'm looking for an appropriate replacement for the seal in the housing. Loose o-rings on the throttle body don't enthuse me.

9th Dec 2022 8:46am

Furnitureman

Member Since: 26 Jan 2021
Location: Leicestershire
Posts: 345

GraemeS
Mine's not leaking but I'm looking for an appropriate replacement for the seal in the housing. Loose o-rings on the throttle body don't enthuse me.

Thing is there not loose they wedge up against the slope of the throttle body and up against the lip inside the rigid plastic pipe, absolutely no where to go and an air tight seal this is after 2000 test miles,

Click image to enlarge

If you find a better cheaper way please share either way it works and costs under £20 2012 Range Rover Westminster 4.4 TDV8
2006 Discovery 3 HSE 260k miles and still going strong with a new owner

9th Dec 2022 1:52pm

JoolsB

Member Since: 16 Aug 2020
Location: The North
Posts: 282

2012 Range Rover Vogue TDV8 Buckingham Blue

Great work. I ended up replacing the hose, the throttle body, the donut hoses and the other pipe with the fragile plastic connector to resolve my intermittent restricted performance. However, when the seal starts to go on the throttle body connector, as it surely will, I’ll do this mod.

9th Dec 2022 4:07pm

garyRR

Member Since: 13 Mar 2021
Location: Hampshire
Posts: 1465

Just to add that I recommend the gas specification PTFE tape as a diagnostic step or temporary repair only (considering it costs 50p and you can get some in any hardware store), to confirm if the seal is causing a restricted performance problem or hold out until you can obtain a new part, not as a permanent repair.

Incidentally however, my 'temporary' repair has now been in place for thousands of miles. 2015 Range Rover Autobiography 4.4 SDV8

9th Dec 2022 5:02pm

mgrover

Member Since: 03 May 2020
Location: Leeds
Posts: 399

2011 Range Rover Vogue TDV8 Santorini Black

love the fix.

ordered the orings.

id recommend doing it early before the leak absolutely wrecks the boost control solenoid just under it and to the right. Its actually a sport

Not anymore, 4.4 TDV8 now

Last edited by mgrover on 12th Aug 2023 7:50am. Edited 1 time in total

11th Aug 2023 1:12pm

JayGee

Member Since: 27 Jul 2021
Location: London
Posts: 3200

Did mine with 0 rings and PTFE as it was leaking a bit. Pretty sure it's made an improvement to drivability and the harsh 1-2 shift is now not noticable. Cant remember how many rings I used but it took considerable force to get the retaining ring to engage and it then became solidly fixed. 2012 TDV8 Vogue (L322)

11th Aug 2023 4:33pm

Jon G

Member Since: 02 Dec 2016
Location: Leicester
Posts: 120

2011 Range Rover Vogue 4.4 V8 Baltic Blue

Not leaking yet but Ordered the O Rings and will do this anyway 👍👍 2001, 4.4 TDV8, Vogue, Baltic Blue

11th Aug 2023 4:41pm

JCW

Member Since: 13 Apr 2013
Location: Cotswolds
Posts: 863

2010 Range Rover Autobiography TDV8 Santorini Black

Me also, ten 75mm x 3mm O rings for £5.50 on eBay, so I’ll have spares.

https://www.ebay.co.uk/itm/143395883454?var=442325233459 Jonathan

2007 Defender 90 XS Hardtop

11th Aug 2023 7:12pm

JCW

Member Since: 13 Apr 2013
Location: Cotswolds
Posts: 863

Just completed this and now have a movement free joint between the plastic intake and throttle body so assume it’ll be leak free, but I’ll check for any oily mess escaping after a few journeys.

A couple of things from me, I needed four o rings rather than three to get a firm seal, I also found I needed to bend the spring clip into a tighter circle before refitting to get it to ‘spring’ into place in the groove and hold the plastic intake firmly.

I also have 6 o rings left over that I’’m happy to post to someone if they want to try this mod out themselves 👍 Jonathan

2007 Defender 90 XS Hardtop

Last edited by JCW on 21st Aug 2023 10:52am. Edited 2 times in total

21st Aug 2023 10:13am

Page 1 of 3

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum