Home > Technical (L322) > Iid tool live codes height sensor help please |
|
|
DrRob Member Since: 16 Apr 2015 Location: Petersfield, Hampshire Posts: 4302 |
Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
|
||
27th Jun 2020 9:02pm |
|
Jammer600 Member Since: 31 Mar 2013 Location: Bath Posts: 212 |
What’s that about? 2018 Suzuki Jimny 2003 written off
|
||
27th Jun 2020 9:17pm |
|
Jammer600 Member Since: 31 Mar 2013 Location: Bath Posts: 212 |
No help? 2018 Suzuki Jimny 2003 written off
|
||
29th Jun 2020 9:56pm |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8195 |
Usually get a load like that when you get a flat battery...
|
||
29th Jun 2020 10:07pm |
|
DrRob Member Since: 16 Apr 2015 Location: Petersfield, Hampshire Posts: 4302 |
As above, clear all faults, run it around for a day or so and then re-check. Most of them look like "normal" ones that pop up due to low battery etc. Only way is clear and re-check Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory" 2025MY Defender D350 90 in Silicon Silver on coils 1974 Series 3 Lightweight = "Millie" Many, many other Landies over the years My preferred specialist: www.glenrands.co.uk -------------------------------------------------- |
||
30th Jun 2020 6:58am |
|
Jammer600 Member Since: 31 Mar 2013 Location: Bath Posts: 212 |
Thanks for the replies
|
||
30th Jun 2020 7:00am |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8195 |
Message Pat at Gap on here and ask him, they will sort you out...
|
||
30th Jun 2020 7:16am |
|
Jammer600 Member Since: 31 Mar 2013 Location: Bath Posts: 212 |
Cheers
|
||||||||
30th Jun 2020 8:51pm |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8195 |
Looks like you need a Front Right height sensor.. Pete
|
||
30th Jun 2020 9:44pm |
|
Jammer600 Member Since: 31 Mar 2013 Location: Bath Posts: 212 |
Yep cheers
|
||
30th Jun 2020 9:46pm |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8195 |
Speaker faults are standard on most fatties... does the PCM work? if it does ignore the fault, all the others are probably down to that sensor... Pete
|
||
30th Jun 2020 9:58pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis