Home > In Car Electronics (L322) > Amplifier Water Ingress / Most Fault - 2011 |
|
|
Baltic Blue Member Since: 13 Aug 2015 Location: North Wales Posts: 3763 |
Don’t ask me any questions it’s far too complicated for an old git like me
|
||||
23rd Feb 2019 2:55pm |
|
Shaun Member Since: 02 Jul 2010 Location: Hull Posts: 58 |
Thanks, will have another look tomorrow. May order myself a link connector for the Most Bus to make things a bit easier. 2004 TD6 - Gone
|
||
23rd Feb 2019 6:44pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35262 |
..or use a bic pen .. |
||
23rd Feb 2019 9:06pm |
|
Shaun Member Since: 02 Jul 2010 Location: Hull Posts: 58 |
Sacrificed a bic pen to link the amplifier Most out and the system comes to life, a new amplifier then. Also have a 2014 amplifier in a 2011 car, so it's had previous!! 2004 TD6 - Gone
|
||
24th Feb 2019 1:53pm |
|
Shaun Member Since: 02 Jul 2010 Location: Hull Posts: 58 |
Purchased a new old stock amplifier and slave fitted. Everything now comes to life, but no sound. I have one spare connector on the amplifier, I am presuming this is correct. Heard it mentioned a battery reset can sort things out. How long do you disconnect it for and do you need to short battery leads together?
|
||||
1st Mar 2019 10:46am |
|
rjff Member Since: 28 Oct 2017 Location: Cambridgeshire Posts: 1196 |
Have a search for battery reset on here. Cheers
|
||
1st Mar 2019 3:03pm |
|
Baltic Blue Member Since: 13 Aug 2015 Location: North Wales Posts: 3763 |
Open the bonnet, then leave it for a while to make sure everything shuts down properly before disconnecting the battery leads.
|
||
1st Mar 2019 3:15pm |
|
Rob99 Member Since: 03 May 2016 Location: Gatwick Posts: 1377 |
It's also in the wiki.......
|
||
1st Mar 2019 3:49pm |
|
Shaun Member Since: 02 Jul 2010 Location: Hull Posts: 58 |
Been told that this may need programming to the car, is this correct? 2004 TD6 - Gone
|
||
2nd Mar 2019 2:10pm |
|
Baltic Blue Member Since: 13 Aug 2015 Location: North Wales Posts: 3763 |
Item number 8 on the installation instructions seem to suggest it will need some sort of programming.
|
||||
2nd Mar 2019 2:36pm |
|
Shaun Member Since: 02 Jul 2010 Location: Hull Posts: 58 |
Ok then, is this something that can be done with an IID tool? Was considering getting one. 2004 TD6 - Gone
|
||
2nd Mar 2019 6:07pm |
|
Shaun Member Since: 02 Jul 2010 Location: Hull Posts: 58 |
|
||||
23rd Mar 2019 11:02am |
|
GGDR Member Since: 26 Nov 2016 Location: London Posts: 3542 |
If you have little HD symbols on your speakers then you have the 1200w system. I think 'Premium' means this - the 1200w system. Otherwise try it on another setting on the IID options?
|
||
23rd Mar 2019 11:49am |
|
Shaun Member Since: 02 Jul 2010 Location: Hull Posts: 58 |
No, it's not HD. Went along with that as it had a premium sticker on the amp. Will try a different one. 2004 TD6 - Gone
|
||
23rd Mar 2019 12:34pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis