MOT Failure because the handbrake works perfectly but it gives an over heating warning message.

There is no over heating and no issue but with the warning there is also no MOT

Suggestions, remedies etc?

The recommended action is a new handbrake module for £755 which fitted comes to £1,800.

PLEASE- Suggestions, remedies etc?

Pls fill in your vehicle details...
. Cheers, Greg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2011 Vogue SE 4.4 with lots of toys in Stornaway

2007 L322 RR 3.6TDV8 Vogue. EHB actuated by switch not lever.

Just added that to my profile too so hopefully will show on this post L322 RR 3.6 TDV8

How do you know there is no over heating? (this will be in the handbrake module which is tucked away in the rear subframe)

Not heard of this issue before, but it does seem the only thing to do is to get the handbrake module out (a right PITA by the looks of things) get it overhauled, and try it again

Do you have a copy of the manual for 2007 model (see wiki) then you can assess the work required. .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

You could try these: http://www.bba-reman.com/gb/index.aspx

Okay - I am going to have a quick look around and see what stuff looks like. Disconnect electrical connections, clean and refit, try and lube the cables to the wheels etc. Nothing major because I can find nothing on Google ab out this issue other than 'replace the unit'.

I am down in Southampton, so close to Winchester. Joe - you may get a plea for help if this all goes wrong!!

Cheers

WCA
 L322 RR 3.6 TDV8

I had an EPB replaced on my 2007 VSE, lots of suspension parts had to be dropped including the rear subframe. 2015 4.4 AB
GSXR 1000 K5
R1 1998

Hi Dolph - that is what the garage told me, hence the £1800 cost.

Can't see a frickin thing under the truck at the moment L322 RR 3.6 TDV8

Would something as simple as reading fault codes be a start? Perhaps clearing them and seeing if that solves the warnings?

The garage tried that but no joy L322 RR 3.6 TDV8

Well I have had a poke around and cannot see anything obvious. I have also just dropped my phone while using it as a torch . Not only did the screen crack, it landed on my face first and has given me a split lip!

So having discovered I can't fix it by swearing and breaking a 2 month old Galaxy S9 phone, bloodied and cold I am going to call it a day.

Please recommend a RR specialist near Southampton. I will default to Brooklyn 4x4 as they are closest but I wouldn't mind talking to some others to see what they say.

Names and numbers please.

 L322 RR 3.6 TDV8

I bought a secindhand one from a specialist RR breaker in Latvia and had it checked out before fitting so it was a quick swap over to save down time. 2015 4.4 AB
GSXR 1000 K5
R1 1998

Keith Gott in Alton ? (MD)

or Joe90's house  .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

Joe are the epb the same as the disco ?