Home > Technical (L322) > Think suspension pump is overworking? |
|
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8190 |
Sounds like a leak somewhere, out with the water and washing up liquid in a spray bottle and check for leaks, the bags are the first thing to check, raise to off road height to reveal more bag first...
|
||
27th May 2015 12:23pm |
|
Stephen.125 Member Since: 25 Jun 2009 Location: Frodsham Posts: 1511 |
+1 I thought I had a faulty suspension compressor actually it was a slow leak on an air bag. Which my halfords jack helpfully found for me by dropping the car hard enough to turn a slow leak into a dirty big hiss!
|
||
27th May 2015 3:42pm |
|
bleeperman Member Since: 01 Nov 2012 Location: lancs and Anglesey Posts: 109 |
Cannot find a leak. The car always stay up so surely a leak would result in that corner going down?
|
||
1st Jun 2015 10:19am |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8190 |
Get the codes read then, there could be some faults stored without it putting a light on..
|
||
1st Jun 2015 5:53pm |
|
axle Member Since: 28 Oct 2007 Location: Perth Perth the end of the Earth Posts: 2964 |
Some times leaks get closed by the bag folding down as the air escapes , then when you start up again the bag inflates and starts to leak 2008 MY Supercharged Rimini Red / Jet four zone climate remote park heater and no ugly kid windows. magnus satis quod turpis satis |
||
2nd Jun 2015 12:43am |
|
bleeperman Member Since: 01 Nov 2012 Location: lancs and Anglesey Posts: 109 |
After 450 milesno fault
|
||
6th Jun 2015 7:28am |
|
bleeperman Member Since: 01 Nov 2012 Location: lancs and Anglesey Posts: 109 |
Tried to reset air suspension inactive with a cheap obd tool it would not clear or reset on steering recal and found no codes.
|
||
6th Jun 2015 7:04pm |
|
bleeperman Member Since: 01 Nov 2012 Location: lancs and Anglesey Posts: 109 |
Think the noise is the new fuel pump fitted 2 week ago Checked ht level links and lubed. Finally fedex found me with Gap tool, but soon realised you need a perfect working LCD Matrix to unlock it Still stranded at bottom of hill with back end down. |
||
13th Jun 2015 10:33am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis