![]() | Home > Maintenance & Mods (L405) > L405 Poor heater |
![]() ![]() |
|
|
rattly Member Since: 15 Oct 2016 Location: Cotswolds Posts: 42 ![]() ![]() ![]() |
Hi all,
|
||
![]() |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8514 ![]() ![]() ![]() |
You could try cleaning this, it's the cabin temp sensor
|
||||
![]() |
|
hoppy_70 Member Since: 04 Apr 2010 Location: Peoples Republic of Mancunia! Posts: 869 ![]() ![]() ![]() |
Does it have the fuel burning heater? If it does there’s a diverter solenoid that stops working (oem item is Bosch and about £120 if you don’t buy from dealer. Was a bit of a pain to get out but warm heater again for me. My Previous RR's!
|
||
![]() |
|
rattly Member Since: 15 Oct 2016 Location: Cotswolds Posts: 42 ![]() ![]() ![]() |
Thx both,
|
||
![]() |
|
rattly Member Since: 15 Oct 2016 Location: Cotswolds Posts: 42 ![]() ![]() ![]() |
Definitely have a better blower motor now, not as good as i`d expect tbh, but still very poor heat.
|
||
![]() |
|
hoppy_70 Member Since: 04 Apr 2010 Location: Peoples Republic of Mancunia! Posts: 869 ![]() ![]() ![]() |
Yes if you have the FBH remote then it’ll be fitted. It’s the left side of the engine bay right at the back. This is the solenoid I fitted (diverter valve), much warmer now! It sticks apparently stopping hot water flow through the matrix.
|
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
