| Topic Starter |
Message |
 Brake pad falling off |
Leigh4571
 4th Apr 2024 7:29am
|
Forum: Technical (L322) · Replies: 24 · Views: 2606 · Subject: Brake pad falling off |
https://www.fullfatrr.com/gallery/albums/userpics/24148/normal_IMG_5151.JPG
https://www.fullfatrr.com/gallery/albums/userpics/24148/normal_IMG_5150.JPG
Hi All,
Thought I would close this thread w ... |
| Brake pad falling off |
Leigh4571
26th Mar 2024 5:17pm
|
Forum: Technical (L322) · Replies: 24 · Views: 2606 · Subject: Brake pad falling off |
Hi All,
So new vented disks and pads on the way.
Yes the carrier is level with the disk. Here's a couple pics with the remaining pad in the carrier, this pad is 12mm total, 6mm steel & 6mm pad ... |
| Brake pad falling off |
Leigh4571
26th Mar 2024 11:32am
|
Forum: Technical (L322) · Replies: 24 · Views: 2606 · Subject: Brake pad falling off |
According to my parts guy;
A rear disc ( 3.6 TDV8 ) LR031844 is vented !!!!
Up to 2005 it was SDB200211 and solid
So my 2008 should have vented on the rear like the photo, this make sense?
... |
| Brake pad falling off |
Leigh4571
26th Mar 2024 10:47am
|
Forum: Technical (L322) · Replies: 24 · Views: 2606 · Subject: Brake pad falling off |
I don't have the missing pad but all the rest are 6mm give or take.
No the pins are not seized.
Yes the piston came out of of the cylinder, just past the seal followed by all the oil.
Exactly ... |
| Brake pad falling off |
Leigh4571
25th Mar 2024 8:39pm
|
Forum: Technical (L322) · Replies: 24 · Views: 2606 · Subject: Brake pad falling off |
Not that I can tell, no wobble in hub, gap from guard small and hand brake works fine.
I will add it was the drivers side that fell off.
Checking passenger side and it’s the same, large gap betwee ... |
| Brake pad falling off |
Leigh4571
25th Mar 2024 8:06pm
|
Forum: Technical (L322) · Replies: 24 · Views: 2606 · Subject: Brake pad falling off |
| Hi All, I have 2008 3.6, and just lost a rear brake pad, the piston popped followed by all fluid and zero brakes. Luckily in supermarket car park and no damage, apart from to nerves. There was a littl ... |
| Check engine light 2008 3.6 - no faults showing |
Leigh4571
13th Dec 2023 9:52pm
|
Forum: Technical (L322) · Replies: 6 · Views: 671 · Subject: Check engine light 2008 3.6 - no faults showing |
Thanks, blanking kit ordered.
I saw elsewhere, via a specialist a service to download to the GAP software to blank the EGR’s £180 inc vat, I’ll look into that, and check with GAP directly. |
| Check engine light 2008 3.6 - no faults showing |
Leigh4571
13th Dec 2023 3:27pm
|
Forum: Technical (L322) · Replies: 6 · Views: 671 · Subject: Check engine light 2008 3.6 - no faults showing |
Used the laptop to check and update the Tool and now have a full list of ECU’s including the engine
There are 3 engine faults;
P0196-26 Engine oil temp sensor general signal failure
P140A-21 Ex ... |
| Check engine light 2008 3.6 - no faults showing |
Leigh4571
13th Dec 2023 10:16am
|
Forum: Technical (L322) · Replies: 6 · Views: 671 · Subject: Check engine light 2008 3.6 - no faults showing |
| Thanks, I don't think I am reading the engine ECU's so will contact the GAP team |
| Check engine light 2008 3.6 - no faults showing |
Leigh4571
12th Dec 2023 4:18pm
|
Forum: Technical (L322) · Replies: 6 · Views: 671 · Subject: Check engine light 2008 3.6 - no faults showing |
Hi All,
2008 3.6 90k miles.
The check engine light came on close to home yesterday, parked up since. I’m just home from work and plugged in GAP Id tool, but there’s no faults. Well no engine fau ... |
| Suspension not level at front |
Leigh4571
25th Nov 2021 6:59pm
|
Forum: Maintenance & Mods (L322) · Replies: 4 · Views: 765 · Subject: Suspension not level at front |
Thanks forgot to say, I’ve checked the sensor after reading a similar issue but due to an incorrectly fitted sensor. But looks fine.
10mm I could live with, but this is 20-25 and it’s noticeabl ... |
| Suspension not level at front |
Leigh4571
25th Nov 2021 1:00pm
|
Forum: Maintenance & Mods (L322) · Replies: 4 · Views: 765 · Subject: Suspension not level at front |
Hi All,
Sorry to ask, an answer to this is sure to be on here some where, but I cant find it;
2007 3.6 V8 76k miles.
It is sitting 3/4 inch lower on drivers side than passenger, no change if been ... |
| Welcome to fullfatrr.com - introduce yourself here! |
Leigh4571
24th Nov 2021 8:25pm
|
Forum: General · Replies: 4317 · Views: 1283659 · Subject: Welcome to fullfatrr.com - introduce yourself here! |
Hi All, mostly due the great support available from people like you, we bought our first RR, a 2007 L322. Good history just a few maint jobs to do.
I have been into series Land Rovers for years so qu ... |
| Bleeding brakes... |
Leigh4571
28th Oct 2021 4:40pm
|
Forum: Maintenance & Mods (L322) · Replies: 15 · Views: 3300 · Subject: Bleeding brakes... |
| Hi, I have the same problem in a 2008 tdv 3.6. Replaced rear pipes and 1 front after much bleeding have a pedal that travels more than it used to, but stops the car, doesn’t improve with pumping, bu ... |
| |
