Advertise on fullfatrr.com »

Home > Technical (L322) > Whistling at motorway speeds
Post Reply  Down to end
Page 1 of 2 12>
Print this entire topic · 
EVOeng



Member Since: 14 Sep 2011
Location: Surrey
Posts: 225

United Kingdom 2007 Range Rover Supercharged 4.2 SC V8 Java Black
Whistling at motorway speeds

Evening Guys,

When I drive my Range Rover at motorway speeds (anything over 50 mph) I tend to get a whistle of air coming through; I have no idea where from. Is this normal?

If Yes, then I think I read somewhere that the 2010 Range Rover had upgraded door seals which minimised the noise further. Any experience of this, or is it just a myth?

If Not, any ideas as to where it could be coming from (windscreen, rubber seals)?

Thanks in advance,

Post #90259 3rd Nov 2011 10:33pm
View user's profile Send private message View poster's gallery Reply with quote
marsie



Member Since: 30 Apr 2010
Location: sheffield
Posts: 916

England 2014 Range Rover Vogue SE SDV8 Loire Blue

i had this on my 04 last week,turned out to be the center air vent being in the half on/half off position.Either way (fullon or off) cured the whistle??
maybe worth a look?
Paul Thumbs Up Paul

2014 Range Rover vogue se 4.4sdv8 Loire Blue
1992 Range Rover Vogue LSE 4.2 Ardennes green

Post #90265 3rd Nov 2011 11:02pm
View user's profile Send private message View poster's gallery Reply with quote
IanV8



Member Since: 14 Jan 2010
Location: Dunfermline
Posts: 502

Scotland 2011 Range Rover Vogue SE TDV8 Santorini Black

Check the plastic rivets in the trim on the A pillar.

They are removed for windscreen replacement and if they are not all refitted with the middle pin flush they can make a noise.

Ian

Post #90281 4th Nov 2011 7:52am
View user's profile Send private message View poster's gallery Reply with quote
Fr_Raf



Member Since: 20 Nov 2010
Location: Lyon - Paris
Posts: 147

France 2004 Range Rover Vogue 4.4 V8 Java Black

I have such a noise , it comes from the windscreen changed just before I bought my FF. I'll have a look at these rivets.
IanV8, are they easy to find on the pillar ?

Post #90284 4th Nov 2011 8:12am
View user's profile Send private message View poster's gallery Reply with quote
alanm_3



Member Since: 19 Feb 2011
Location: my House, unless I’m not at home, in which case I’m somewhere else.
Posts: 6730

Scotland 2017 Range Rover Autobiography SDV8 Loire Blue

marsie wrote:
i had this on my 04 last week,turned out to be the center air vent being in the half on/half off position.Either way (fullon or off) cured the whistle??
maybe worth a look?
Paul Thumbs Up


I get this in my car when the temperature wheel in the centre console is moved from red (hot setting) to blue (cold setting).

No idea why, but when it's in the middle position, there's a whistle through the air vents. All I need to do is move it slighty either way and the noise disappears! Thumbs Up Got - 2017 SDV8 Autobiography in Loire Blue
Had- 2008 TDV8 Vogue SE in Java black
Had - 2007 S/C in Stornoway Grey

Post #90292 4th Nov 2011 9:55am
View user's profile Send private message View poster's gallery Reply with quote
Emperor Mong



Member Since: 07 Jul 2010
Location: London
Posts: 1435

United Kingdom 2019 Range Rover Autobiography 2.0 PHEV Loire Blue

IanV8 wrote:
Check the plastic rivets in the trim on the A pillar.

They are removed for windscreen replacement and if they are not all refitted with the middle pin flush they can make a noise.

Ian

This ^^^
The external black finishers will give a whistle if they aren't fitted properly.

Post #90390 4th Nov 2011 7:16pm
View user's profile Send private message View poster's gallery Reply with quote
EVOeng



Member Since: 14 Sep 2011
Location: Surrey
Posts: 225

United Kingdom 2007 Range Rover Supercharged 4.2 SC V8 Java Black

Thanks for the replies,

It is not the center air vent being in the half on/half off position, as I tend to have it on the red hot option at this time of the year.

I think it may be these rivets on the A Pillar, this may sound like a really silly question but how on earth do I rectify the rivet faults? Any instructions available?

Thanks again,

Post #90413 4th Nov 2011 8:22pm
View user's profile Send private message View poster's gallery Reply with quote
Googsy



Member Since: 02 Jun 2011
Location: Where men are men and sheep are nervous.
Posts: 2947

Ireland 2008 Range Rover HSE TDV8 Java Black

Try the plastic at bottom of windscreen if screen has been replaced like mine its possible they did'nt seal between bottom of screen and plastic trim. I used some black silicone sealant and that sorted my issue no noise at all now. Thumbs Up Present :2008 TDV8 HSE
Gone Audi A5 2.7TDI
Gone Discovery 3 HSE
Gone Mercedes CLK
Gone Range Rover 2.5 DSE

Post #90458 5th Nov 2011 12:39am
View user's profile Send private message View poster's gallery Reply with quote
Gazellio @ Prestige Cars



Member Since: 22 Jan 2010
Location: Chilterns, UK
Posts: 11309

United Kingdom 2010 Range Rover SE Td6 Zermatt Silver

As above try pressing the scuttle firmly home it may have come loose......

Post #90460 5th Nov 2011 8:16am
View user's profile Send private message View poster's gallery Reply with quote
IanV8



Member Since: 14 Jan 2010
Location: Dunfermline
Posts: 502

Scotland 2011 Range Rover Vogue SE TDV8 Santorini Black

Fr_RAF

When you open the front doors thay are facing you as they go in from the rear.

They are black plastic and when new have the inner sticking out, you push them into the hole and then tap the middle bit which drives in and forces the rivet to tighten in the hole.

To get old ones out you can either tap the inner bit all the way in, might end up with it rattling around though, or drill a small hole and use a self tapper to pull it out.

It was a windscreen fitter mate you told me to check they were all there.

Ian

Post #90771 7th Nov 2011 9:46am
View user's profile Send private message View poster's gallery Reply with quote
Fr_Raf



Member Since: 20 Nov 2010
Location: Lyon - Paris
Posts: 147

France 2004 Range Rover Vogue 4.4 V8 Java Black

Thank you IanV8, I'll have a look Bow down

Post #90792 7th Nov 2011 12:52pm
View user's profile Send private message View poster's gallery Reply with quote
Joe90



Member Since: 29 Apr 2010
Location: Hampshire
Posts: 6409

England 

If the screen has been replaced the fitters may have used metal rivets to refit (they did on mine)

Click image to enlarge
 .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember Wink
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

Post #90815 7th Nov 2011 2:52pm
View user's profile Send private message View poster's gallery Reply with quote
EVOeng



Member Since: 14 Sep 2011
Location: Surrey
Posts: 225

United Kingdom 2007 Range Rover Supercharged 4.2 SC V8 Java Black

Afternoon Gents,

Ok I have diagnosed the wind noise as some faulty retaining clips; there are eight clips on each of the two side, four yellow plugs and four plastic clips. Also the strip that runs from the rear to the front (where the roof bars normally fix to) had become loose in the front so a bit of sealant has sorted the noise from one side.

I will take pictures of the procedure when I do the other side and post them up after the weekend, I also have the part numbers for the clips which I will post up.

On the side that I did repair, all four of the plastic black clips were broken and some of the yellow clips had no foam rings on them. Now just have to do the same with the other side (I ran out of yellow clips as LR dealer told me there are only 2 on each side, but there are 4).

Hope this helps

Post #91026 8th Nov 2011 3:45pm
View user's profile Send private message View poster's gallery Reply with quote
Haydn



Member Since: 10 Oct 2016
Location: Sussex
Posts: 10

United Kingdom 2010 Range Rover Vogue TDV8 Stornoway Grey

Picked my 2010 vogue today, used the check list care of Matthew Stevenson Thanks Matt, everything checked out ok called the Land Rover dealer who originally sold and serviced the vehicle about the recall on front diff was advised only 2002 -2003 were recalled mine had the new diff so no recall was required, drove down the A12 from Chelmsford Saxton 4x4 and was getting a horrible wind noise, from the front screen. I've checked this forum on wind noise and I suspect the windscreen has been replaced so will be checking bells and whistles on the screen tomorrow sounds like it's something trivial

Post #409069 12th Oct 2016 7:38pm
View user's profile Send private message View poster's gallery Reply with quote
pembsRR



Member Since: 15 Oct 2012
Location: Wales
Posts: 35

Check the black bits on the A pillar at tight to the screen. Although my 2010 was a 2 year old approved used when I bought, they were loose and caused noise - had them fixed under warranty (suspect it was just some clips)

Post #409229 14th Oct 2016 5:21am
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 1 of 2 12>
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site