Afternoon Chaps,

Just a quick question today -

I want to remove the rear tailgate oval 'Land Rover' badge, similar to that of the 2011 Range Rover.
Is there any easy way of doing this without damaging the paintwork? Also, has the tailgate got an indent for the badge, or is it all flush with no holes?

Thanks in advance.

talked about many times rad and there are many suggestions..no holes are left and the way i did it was to heat up the adhesive with a hairdryer and gently prise off the badge..you'll be left with the adhesive on the bodywork which you can rub of with your fingers.. ... - .- -.




Y. O. L. O.
.

Thanks for the quick response.
Will try this out over the weekend.

Dental floss 2010 MY Vogue SE TDV8 3.6 Stornoway Grey- fully loaded

nylon guitar string. V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

Just an update:

I used a hairdryer to loosen the glue and was left with the foreseeable ring of glue.
After getting as much of it off as possible with the hairdryer and scraper ‘tool’ – then proceeded to put some Super Resin Polish on it and get the remains off. Now, IMO the car looks fantastic!

G-string  Present :2008 TDV8 HSE
Gone Audi A5 2.7TDI
Gone Discovery 3 HSE
Gone Mercedes CLK
Gone Range Rover 2.5 DSE

I'm replacing a knackered badge on mine - will the residual glue be sticky enough or do I need more glue - and if so, what type? 17 MY Corris Grey 4.4 VAB
Silver MB R231 SL350

Best use 3m double sided automotive tape the thinner the better and is what they use in the first place  Present :2008 TDV8 HSE
Gone Audi A5 2.7TDI
Gone Discovery 3 HSE
Gone Mercedes CLK
Gone Range Rover 2.5 DSE

Cheers.  17 MY Corris Grey 4.4 VAB
Silver MB R231 SL350