Advertise on fullfatrr.com »

Home > Maintenance & Mods (L322) > 2011 4.4 TDV8 Oil Leak
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
kernokerno



Member Since: 12 May 2024
Location: cornwall
Posts: 12

United Kingdom 
2011 4.4 TDV8 Oil Leak

Ok have just replaced the two O-Rings on the oil cooler pipe they had definitely failed and leaking oil.
My question is having removed top engine cover for access its sodden with oil and top of engine has loads of oil visible.
Could this mean I have an oil cooler problem or can the oil leaking from the oil cooler pipe end up being blown up the top of the engine as well as down the back ?
I have checked coolant expansion bottle and no oil contamination present.
I know there are two oil cooler gaskets if one or both fail does that always mean oil contamination in the coolant ?
Have road tested and definitely no oil leaking from the oil pipe now.
Any ideas much appreciated.

Post #692631 14th May 2024 3:56pm
View user's profile Send private message View poster's gallery Reply with quote
Fla



Member Since: 26 Nov 2023
Location: South west
Posts: 187

Ireland 2012 Range Rover Westminster 4.4 V8 Zambezi Silver

I had an oil leak on my 2012 Westie and I just decided to change it all, the O rings, the oil coller and gave the whole place a clean. I no longer have a leak. The gasket on the oil cooler gets compressed in certain parts and leaks a fair bit..

I went for a Nissens cooler, I think it was €220 or something like that and it was well worth it. You can just replace the gaskets if you have the patients. Current yokes
2012 4.4 TDV8 Westminster
2006 Disco 3
Scoobie GT wagon
Mx5 G Ltd
TT S Line
Pajero JDM Exceed

Post #692634 14th May 2024 4:11pm
View user's profile Send private message View poster's gallery Reply with quote
JayGee



Member Since: 27 Jul 2021
Location: London
Posts: 3195

United Kingdom 2012 Range Rover Vogue 4.4 V8 Orkney Grey

Consensus is once you have gone to the trouble of removing the cooler it's best to replace it rather then just the gaskets as they are prone to warping and cracks which means you have to do the job again. 2012 TDV8 Vogue (L322)

Post #692635 14th May 2024 4:18pm
View user's profile Send private message View poster's gallery Reply with quote
kernokerno



Member Since: 12 May 2024
Location: cornwall
Posts: 12

United Kingdom 

Thanks Fla and JayGee

Unfortunately doesn't throw any light on my original questions

But thanks for the response

Post #692637 14th May 2024 4:31pm
View user's profile Send private message View poster's gallery Reply with quote
JayGee



Member Since: 27 Jul 2021
Location: London
Posts: 3195

United Kingdom 2012 Range Rover Vogue 4.4 V8 Orkney Grey
Re: 2011 4.4 TDV8 Oil Leak

kernokerno wrote:
its sodden with oil and top of engine has loads of oil visible.
Could this mean I have an oil cooler problem
- yes 2012 TDV8 Vogue (L322)

Post #692644 14th May 2024 5:16pm
View user's profile Send private message View poster's gallery Reply with quote
pcourtney



Member Since: 14 Jan 2020
Location: Stansted
Posts: 804

England 2011 Range Rover Vogue 4.4 V8 Sumatra Black

I had to also change the rocker cover gaskets on both banks of the TDV8, one was worse than the other, but whilst we did the tiny o rings (behind the oil cooler ) , and the two oil cooler gaskets, and a few other things, we also replaced the rocker cover gaskets, oil leak gone Smile

Whilst doing that I ran down to Colchester Fuel Injection and got the 8 injectors checked over, one was really out of tolerance, so it was replaced, my car is approaching 180,000 miles, so not only has the oil leak stopped, and everything given a good clean, but it is running really nicely and seems to have a little bit more repsonse at the same time !

https://www.colfuel.co.uk/main-test-facilities/

Post #692645 14th May 2024 5:16pm
View user's profile Send private message View poster's gallery Reply with quote
BBryant



Member Since: 07 May 2024
Location: Buckinghamshire
Posts: 9

United Kingdom 2011 Range Rover Vogue SE 4.4 V8 Buckingham Blue

I have heard of leaks from the top of the oil pump, there is a small screw that can come loose. Apparently difficult to reach but a simple fix.

https://www.fullfatrr.com/forum/topic45765-30.html

Post on this page by nino-nino explains it, I am going to have a look at it myself this evening as I still have an oil leak somewhere even after having the cooler and o-rings done. Will feedback if I find anything.

Also noticed some oil on this hose, the hose seems ok though so think its coming from above. I think this goes to the oil cooler? Front right hand side of the engine.


Post #692765 16th May 2024 9:33am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site