fullfatrr.com - View topic - Alternative to L405 gear selector

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Mods (L405) > Alternative to L405 gear selector

Page 8 of 12

3 ...

Print this entire topic ·

JDGeorgia

Member Since: 11 Oct 2023
Location: Atlanta GA
Posts: 159

2006 Range Rover HSE 4.4 V8 Buckingham Blue

Between woodworking orders and Day Job travel... not much has happened.
Returned from Minnesota this evening to find the Mouser order had been delivered! LaShonda is good... (Also got the MY17 HUD from eBay as well... that is another post. https://www.fullfatrr.com/forum/topic68365.html)

Took some time to assemble the rest of the PigTail.

The fancy schmancy pins - probably did not need to be so fancy schmancy...
I only ended up screwing up 1 Pin crimp - New League Record!

Since the scab had pins coming from a PCB... I am not inserting the pins into a 'pin holder' - in fact, they don't fit. Not even close... I just butted them up against the back of the scab with some CA Glue - but it is good info for future generations of idiots.

Click image to enlarge

Inserting the L405 (12 hole) pigtail into the Scab was key. Thanks for that.
I inserted it all the way since I was working on the backside and there is a mil or so of airspace even when it was clicked in.

Click image to enlarge

Each wire was crimped and the crimp was 'heat shrinked' (Blue) - then I decided I really should have used a slightly larger wrap to catch the square base of the 'pin'(Green).

It was all checked for continuity and shorts between the wires - I left the (12 Wire) pigtail inserted and checked wire color to wire color. I inserted the screwed up 'pin' into the L494 Female - clamped the negative, touched the positive to the stripped end of the L405 pigtail. All good.

Click image to enlarge

The machine screws to hold the L494 Lever into the sub-frame will be sourced from Ace Hardware tomorrow if I get some time at lunch.

I have been going through Vids and the L405 Workshop Manual (Thanks for that) on how to remove the top of the console - if we are not careful - this may happen... FAFO! JDW 2006 L322 HSE LUX 4.4NA Jag V8 Buckingham Blue/Ivory - 'Col Reb'
Rolled Yahtzee Aug 2023 222,222Miles
2016 L405 HSE TD6. Santorini Black over Almond. - 'Donna the Diesel'
Only L405 IN THE KNOWN UNIVERSE with an L494 Shift Lever Fitted!
97K at purchase Sept of 2023

Last edited by JDGeorgia on 10th Nov 2023 1:46am. Edited 1 time in total

9th Nov 2023 12:59am

JDGeorgia

Member Since: 11 Oct 2023
Location: Atlanta GA
Posts: 159

Bought the Machine Screws for the L494 Lever to Sub-Frame today - in the US - you can find them at Ace Hardware... M5X20 .80 pitch for the screws ($0.53/ea).

I also bought 'split washers' or 'lock washers'($0.16/ea), but will probably just go with Loctite Blue.

Not sure if there is a British equivalent to the Southern phrase 'Wallered out'... but when I test fit the lever - I noticed that the front nylon holes were a bit wallered out, and the back was fine...

Click image to enlarge

Naturally, it is a more aggressive 'shift' into Drive than it is into Reverse and the front screws take the brunt of that.
I will hit Ace again this weekend and get some M5 flat washers to spread torque of the Need for Speed!
Some Pics to add to the library (at Alexandria)...

Click image to enlarge

2006 L322 HSE LUX 4.4NA Jag V8 Buckingham Blue/Ivory - 'Col Reb'
Rolled Yahtzee Aug 2023 222,222Miles
2016 L405 HSE TD6. Santorini Black over Almond. - 'Donna the Diesel'
Only L405 IN THE KNOWN UNIVERSE with an L494 Shift Lever Fitted!
97K at purchase Sept of 2023

10th Nov 2023 1:43am

aljo

Member Since: 04 Jul 2018
Location: west sussex
Posts: 202

2019 Range Rover Vogue SE 2.0 PHEV Santorini Black

How are you progressing with the gear lever swap ? Hope it’s going well 👍 and not causing too many problems Last night I lay in bed looking up at the stars in the sky and I thought to myself, where,s the f**king ceiling!!

25th Nov 2023 9:10am

JDGeorgia

Member Since: 11 Oct 2023
Location: Atlanta GA
Posts: 159

aljo,

I guess I have been awfully quiet - especially for my verbose self - of late...

Day job has picked up a couple of new clients that required travel(I am in a hotel as I type this). I also had some woodworking projects I had to get out. Here in the States we have Thanksgiving, so I was on Holiday on Hilton Head Island for the week. The Iron Bowl - American College football with my beloved Tigers vs the toothless inbreeds from Tuscaloosa - was Saturday and I was there... Probably too much info. In short, Life has been busy.

In the coming weeks I will have some time to dismantle the center console. I was looking at the components yesterday thinking I need to get back on that.

Thanks for checking in - JDW 2006 L322 HSE LUX 4.4NA Jag V8 Buckingham Blue/Ivory - 'Col Reb'
Rolled Yahtzee Aug 2023 222,222Miles
2016 L405 HSE TD6. Santorini Black over Almond. - 'Donna the Diesel'
Only L405 IN THE KNOWN UNIVERSE with an L494 Shift Lever Fitted!
97K at purchase Sept of 2023

28th Nov 2023 2:07am

JDGeorgia

Member Since: 11 Oct 2023
Location: Atlanta GA
Posts: 159

ONLY L405 IN THE KNOWN UNIVERSE WITH A GEAR LEVER!!!!!!

Gentlemen (and Ladies),

We DID IT!!!

A proper gear lever from an L494 CAN be swapped into an L405 - at least from an Electro-Mechanical standpoint... There is much to do, but ride along with me as I take the only L405 in the known universe with a gear lever on a spin around the block...

Click image to enlarge

I don't seem to be able to post videos here... so please enjoy the ROUGH cut video of my first drive with the L494 Gearshift (lever).

The subframe is too wide and the lever is too deep. It will take work to get this thing looking like it came from the UK this way. A Dremel and a cut-off wheel will prove invaluable. Then there is the issue of the top of the console. To look Factory will be the biggest challenge to date.

The 'Range Rover filler' is a chromed plastic piece that can be removed... but there is no support to move it to the front.

Things are completely torn apart - so if you need pics of something on the guts of the L405.
Let me know - now is a good time to get them. Thanks to all the folks that provided part numbers, technical advice and general encouragement - never would have thought of doing this without y'all.

The 'Pretty Bits' will be the most difficult, but hopefully it will work as smoothly.

More to come in the days ahead! - JDW 2006 L322 HSE LUX 4.4NA Jag V8 Buckingham Blue/Ivory - 'Col Reb'
Rolled Yahtzee Aug 2023 222,222Miles
2016 L405 HSE TD6. Santorini Black over Almond. - 'Donna the Diesel'
Only L405 IN THE KNOWN UNIVERSE with an L494 Shift Lever Fitted!
97K at purchase Sept of 2023

29th Nov 2023 11:14pm

DrF

Member Since: 30 Jun 2014
Location: South East
Posts: 1438

2013 Range Rover SVAutobiography 5.0 SC V8 Orkney Grey

Well JDGeorgia,

Congratulations, a world first

That's a labour of love and looks great, brilliant video lets hope the unsupervised time renders good results. I like it.

Now comes the really hard bit, making it look factory. Well done again.

The fact you have 7,000 page views must make this one of the most viewed pages, keep up the sterling work.

29th Nov 2023 11:27pm

JDGeorgia

Member Since: 11 Oct 2023
Location: Atlanta GA
Posts: 159

Dr F - if you are ever in Atlanta - let me know... would love to have you by.
We only do (sweet) Iced Tea... but if you are here in July or August you will understand!

In my #DayJob and woodworking, I am used to Concept to Creation - but this was kinda nuts!
Adapt, Overcome, Improvise, Conquer... 2006 L322 HSE LUX 4.4NA Jag V8 Buckingham Blue/Ivory - 'Col Reb'
Rolled Yahtzee Aug 2023 222,222Miles
2016 L405 HSE TD6. Santorini Black over Almond. - 'Donna the Diesel'
Only L405 IN THE KNOWN UNIVERSE with an L494 Shift Lever Fitted!
97K at purchase Sept of 2023

29th Nov 2023 11:36pm

DrF

Member Since: 30 Jun 2014
Location: South East
Posts: 1438

JD Georgia,

Thanks for your kind offer.

As a result of your sterling efforts, I believe it's time we should honour efforts such as this. Therefore I am proposing we should have an annual awards on the forum, you sir are my nomination of 2023.

29th Nov 2023 11:44pm

JDGeorgia

Member Since: 11 Oct 2023
Location: Atlanta GA
Posts: 159

I am pretty sure they already have an award for this kind of stuff... it is called the Darwin Awards!

https://darwinawards.com/

I come from a long line of White Trash - so if an award is presented and I can not be present... These are my people! They will represent me.
https://www.peopleofwalmart.com/ 2006 L322 HSE LUX 4.4NA Jag V8 Buckingham Blue/Ivory - 'Col Reb'
Rolled Yahtzee Aug 2023 222,222Miles
2016 L405 HSE TD6. Santorini Black over Almond. - 'Donna the Diesel'
Only L405 IN THE KNOWN UNIVERSE with an L494 Shift Lever Fitted!
97K at purchase Sept of 2023

29th Nov 2023 11:55pm

DrF

Member Since: 30 Jun 2014
Location: South East
Posts: 1438

Now there is some things I can't unsee!!!

30th Nov 2023 12:00am

aljo

Member Since: 04 Jul 2018
Location: west sussex
Posts: 202

Fantastic work great to see a genius at work
I would certainly second you for an award Last night I lay in bed looking up at the stars in the sky and I thought to myself, where,s the f**king ceiling!!

30th Nov 2023 7:06pm

Andy S

Member Since: 16 Jun 2013
Location: Sevenoaks
Posts: 1043

2015 Range Rover Vogue SE SDV8 Aintree Green

Excellent work and definitely worthy of an award.

Also tells me its not a straight swap, which is kind of what I was hoping!

30th Nov 2023 9:22pm

JDGeorgia

Member Since: 11 Oct 2023
Location: Atlanta GA
Posts: 159

Let's not celebrate too soon...

The Frustration Meter TM - is at an all time high...
2 hours during lunch and I am spitting nails. Maybe I should have eaten BEFORE grabbing the cut-off wheel. Nothing like low blood sugar and power tools!

I cut out a part of the console 'floor' that I probably did not need to...

Click image to enlarge

It turns out that there a foam duct - kind of brilliant actually - under the floor of the console.
I assume it is a Temp Probe that was hot glued to a square cut-out in the top of the duct. I removed the probe and it's holder from the bottom side of the console floor and re-glued it back to the top of the duct.

Click image to enlarge

The Sub Frame is floating in mid air in the L405... there is no good way nor place to attach it to measure anything. It is also too wide. I cut off the lower left 'foot', and sanded down the side that slams against the driver side 'wall' - even with that it appears to be too far toward the center of the console...

(is there a limit to the number of censored imogees one can use in a single post?)

The only thing in futzing around that seemed to have any kind of promise was to possibly 'hang' it from the underside of the console lid like the spinny knob. I know we discounted that a while back, but I could build an 'adapter' piece(s) of wood that the L494 would screw into - and then a different set of holes to catch the L405 holes in the underside of the console. this could be made in such a way to add support
I would probably run it in such a way that a 'filler piece would just sit down on it.

Click image to enlarge

If I can get the silver bit flush or even a little proud, it would be less of a crumb catcher than the L494...

Things got a little weird(er) at one point, aaaaand I completely disassembled the L494 gearshift...
If memory serves, I was trying to get the 'chrome' oval trim off the gearshift - it looked like it would involve drilling out a giant rivet and witchcraft and blood sacrifice - so I reassembled it before I forgot how it came apart.
But just in case anyone wants to see the guts of the L494 Gear Shift module...

Click image to enlarge

I may let this rest for a couple of days or weeks... As one of Santa's Helpers, I have 'toys' to get out before Christmas.

If an adapter can be built and successfully hung from the bottom of the console... there is hope yet. 2006 L322 HSE LUX 4.4NA Jag V8 Buckingham Blue/Ivory - 'Col Reb'
Rolled Yahtzee Aug 2023 222,222Miles
2016 L405 HSE TD6. Santorini Black over Almond. - 'Donna the Diesel'
Only L405 IN THE KNOWN UNIVERSE with an L494 Shift Lever Fitted!
97K at purchase Sept of 2023

Last edited by JDGeorgia on 30th Nov 2023 10:45pm. Edited 1 time in total

30th Nov 2023 10:33pm

JDGeorgia

Member Since: 11 Oct 2023
Location: Atlanta GA
Posts: 159

Andy S wrote:
Excellent work and definitely worthy of an award.

Also tells me its not a straight swap, which is kind of what I was hoping!

You're dead to me...

It was your post that started all this! We need POSITIVE Chee projected into the Universe... 2006 L322 HSE LUX 4.4NA Jag V8 Buckingham Blue/Ivory - 'Col Reb'
Rolled Yahtzee Aug 2023 222,222Miles
2016 L405 HSE TD6. Santorini Black over Almond. - 'Donna the Diesel'
Only L405 IN THE KNOWN UNIVERSE with an L494 Shift Lever Fitted!
97K at purchase Sept of 2023

30th Nov 2023 10:41pm

DrF

Member Since: 30 Jun 2014
Location: South East
Posts: 1438

Evening JDGeorgia,

As with all things JLR, two steps back one step forward, however I have to say it's looking rather good, and nothing a few cold fizzy beverages won't solve.

I have every confidence you're wizidary will make this look nothing short of amazing old bean .

Keep up the sterling work, and I look forward to the next installment.

I would love to see the main dealers face when you drive it in for a service....

30th Nov 2023 10:52pm

Page 8 of 12

3 ...

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum