fullfatrr.com - View topic - 4.4 TDV8 Cracked air intake manifold

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical (L322) > 4.4 TDV8 Cracked air intake manifold

Page 3 of 3

Print this entire topic ·

Baltic Blue

Member Since: 13 Aug 2015
Location: North Wales
Posts: 3763

2011 Range Rover Vogue SE TDV8 Baltic Blue

Unfortunately a lot of my early pictures were deleted, but most come from the workshop manual.
I have got hundreds stored on my iPad but no way of knowing which that one was.
Hope this one is useful.

Click image to enlarge

The green arrow is pointing to the oilway connection that suffers the O ring leak problem.
Mike. G reg 2.5VM Vogue Portofino red 1991- 1999
V reg 2.5td P38 Rioja red 1999- 2006
53 reg td6 Vogue Oslo blue 2006- 2015
11 reg 4.4 TdV8 Vogue SE. Baltic blue 2015- date.
https://www.fullfatrr.com/forum/topic56162...tty+affair

9th Jan 2020 4:49pm

Dolphinboy

Member Since: 07 Dec 2009
Location: Bristol
Posts: 3136

2011 Range Rover Vogue TDV8 Atacama Sand

Thanks Mike. I found this one on your gallery but thanks for re-posting.

9th Jan 2020 6:42pm

Maxwell-Auto

Member Since: 23 Sep 2022
Location: Northern Ireland
Posts: 4

2011 Range Rover Vogue TDV8 Galway Green

Click image to enlarge

Hi MikeyP

Its 2022 and my TDv8 inlet manifold has cracked in exactly the same plane

Judging my my trawl of the net and reports by my friendly dealer, this is not an isolated problem,

I have written to JLR and they have as suspected tried to align with my warranty which ran out in 2015
Frankly I would like to hear from all those who have had to fix this obvious design and materials negligence.

I do not relish spending 1600 euro on a replacment for something that has such a weak life span.
I am advised by Island 4 x 4 that it was upgraded in 2013 with the L405
Discovery 4 drivers also has a similar spate of problems.

Can anyone shed light on who exactly manufactures this part as I may want to sue them also if JLR deop the ball

I might add I've been a LR owner for 45 years and have a stable of 5 restored vehicles from the age when cars which broke down could be fixed without the aid of plastic parts!

Click image to enlarge

23rd Sep 2022 3:57pm

JayGee

Member Since: 27 Jul 2021
Location: London
Posts: 3193

2012 Range Rover Vogue 4.4 V8 Orkney Grey

Can it be repaired by pinning it back together along the seam with some self tapping screws similar to what has been done to my plenum?

I've got a spare that I've cleaned and I'm going to reinforce the seams in the same way before I put it on. 2012 TDV8 Vogue (L322)

23rd Sep 2022 7:57pm

JST

Member Since: 12 Dec 2013
Location: Somerset
Posts: 488

2012 Range Rover Westminster 4.4 V8 Stornoway Grey

Evening all, an old thread i know.

One of those four hoses on mine has split.

Does anyone have the mpn for them? From reading this there are new ones?

And i am assuming the manifold, doughnut, needs to come off to fit as theres limited space. Could someone point me on thendirection for instruction to remove the doughnut please. Cheers

James

7th May 2023 6:18pm

upagreen1

Member Since: 21 Feb 2021
Location: Yorkshire
Posts: 9

2011 Range Rover Vogue 4.4 V8 Atacama Sand

this thread describes removal of the plenum: https://www.fullfatrr.com/forum/topic62108.html
in the same thread there's also a diagram of the parts

8th May 2023 1:27am

rjff

Member Since: 28 Oct 2017
Location: Cambridgeshire
Posts: 1196

2011 Range Rover Vogue TDV8 Santorini Black

James

Replacement of the four short hoses may be done with silcone hose rather than JLR parts. IIRC it's 75mm diameter and buy a length to cut along with some good suitably sized hose clips. Quite a few on here have done that successfully with these and other hoses. (and you can use fancy colours if you wish)

Have a search on here for the correct diameter and also someone may be along with suppliers. A net search brings up lots. Cheers
Richard

(there are no such things as an ordinary FullFat, an ordinary cat or too many tools)
2011 TDV8 Vogue Santorini Black
Gap IIDBT

8th May 2023 8:20am

JST

Member Since: 12 Dec 2013
Location: Somerset
Posts: 488

Excellent, thank you both. Cheers

James

8th May 2023 9:04pm

DannyJeff

Member Since: 13 May 2023
Location: Brighouse
Posts: 3

2012 Range Rover Westminster 4.4 V8 Santorini Black

Hi James

Not sure if you have sorted replacement hoses yet, I think the part number of the 4 hoses you are after are LR056285.

As it happens I have 4 brand new in the garage I’ve been trying to sell if you’re interested?

I only have them spare because I’d just changed all 4 a couple of months before the inlet split and I couldn’t get the centre inlet plenum without them!

Cheers Danny 2012 L322 4.4 TDV8 Westminster
1965 Series 2A 2.25 N/A Diesel Truck Cab

14th May 2023 3:40pm

Page 3 of 3

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum