Home > In Car Electronics (L322) > My experience in installing NaviPlus CarPlay in a L322 MY10 |
|
|
jjfang Member Since: 13 Nov 2020 Location: Chicago Posts: 44 |
I recently installed this system. Its worked amazing since with only one issue. The issue being sometimes when the system wakes back up my whole screen goes crazy. This is generally solved by me starting the car engine or I have to start it then shut off the engine then start it back up. It happens only a couple times, was this solved by messing with the wiring? I was told from Naviplus that this is a voltage issue and the recommended me to reroute the power cable. |
||
21st Dec 2020 10:18pm |
|
Siftah Member Since: 11 Jun 2018 Location: Barcelona Posts: 344 |
Can you tell me how you re-routed the power cable?
|
||
25th Dec 2020 11:59am |
|
jjfang Member Since: 13 Nov 2020 Location: Chicago Posts: 44 |
I haven’t rerouted the power, I’m a bit reluctant to do so. Mainly I don’t want to mess with it all again tbh. I haven’t noticed any battery issues or drain issue in my rover. I wonder if our static issue is similar to robkuijpeTA where he ended up messing with the ribbon cable? |
||
27th Dec 2020 4:09am |
|
Siftah Member Since: 11 Jun 2018 Location: Barcelona Posts: 344 |
Pretty much the same as me tbh, I'm a bit wary of messing with the wiring when it's basically working!
|
||
27th Dec 2020 5:45pm |
|
RJPotts Member Since: 19 Aug 2021 Location: Durham Posts: 207 |
Apologies for resurrecting an old thread, I found it whilst googling "naviplus install circuit board". As I'm in the UK I was quite interested to read supershuttle's post here about the kit available from 'Unique Auto Developments', the dualview version is now available to order. As I'll shortly be removing some of the dash / gloveboxes anyway for another job I did the same as robkuijpers. Contacted the company involved (UAD) and asked for a copy of the installation manual, to assess the amount of work / complexity / risk, also to decide if I'll do it when I do the other job or wait till later & get it done professionally. I was directed to a YouTube video which is incomplete (& the bit that isn't covered is where any single / dualview differences would be I believe). I asked again and was told "The full manual for this product has not been finalised yet, however the installation is very similar to the single view product. This product will come with the full comprehensive guide in the box that details the installation with photos.". So I asked if they would send a copy once it's finalised / by the time the units start shipping. I received a reply stating "We can't release the full comprehensive guide that is included in the box prior to purchase, however for the time being I can send across a couple of pages from the Single View L322 manual so you can get a better idea.". The couple of pages are regarding trim removal. If it's their product and their manual then clearly it's a case of won't send, not can't send. I wondered, is it unreasonable to ask for a copy of the instructions to decide whether or not I'll fit it myself / get a professional to fit it / decide against the idea?? Cheers Richard 2010 Range Rover Autobiography TDV8 Santorini Black 2010 Range Rover Autobiography TDV8 Zermatt Silver [Gone] 2003 Range Rover HSE Oslo Blue [Gone] 1985 Camel Trophy 90 (Netherlands Team Vehicle) [Gone] 1990 Camel Trophy 127 (Workshop Vehicle) [Gone] 1989 Camel Trophy 110 (Workshop Vehicle) [Gone] 1998 Camel Trophy Freelander (South African Team Vehicle) 1995 Camel Trophy Discovery 300Tdi (Raft Unit) [Gone] |
||
23rd Jun 2022 5:31pm |
|
Full-fat-Lance Member Since: 06 Feb 2022 Location: Essex Posts: 119 |
Not unreasonable at all. I expect they simply don’t want you to see how much work is involved until after they’ve got your money. Otherwise you might be put off and not purchase. |
||
23rd Jun 2022 9:42pm |
|
RJPotts Member Since: 19 Aug 2021 Location: Durham Posts: 207 |
I think you're correct there Full-fat-Lance,
|
||
24th Jun 2022 8:56am |
|
jimmie Member Since: 19 Jul 2014 Location: Warsaw Posts: 162 |
because it looks like three separate units put together: universal android auto/carplay box and can bus decoder (standard chinese boxes) and lvds switching board which is the magic part, but you can buy it on aliexpress already (for L320) |
||
24th Jun 2022 4:27pm |
|
RJPotts Member Since: 19 Aug 2021 Location: Durham Posts: 207 |
Tell us more jimmie....... Have you done this / seen anyone who has / got any links to successful installs or links to suitable items please? 2010 Range Rover Autobiography TDV8 Santorini Black
|
||
24th Jun 2022 5:15pm |
|
jimmie Member Since: 19 Jul 2014 Location: Warsaw Posts: 162 |
screen interface: https://www.aliexpress.com/item/1005003642...3075Yi90jJ
|
||
27th Jun 2022 8:49pm |
|
rscsmith Member Since: 07 Aug 2022 Location: Sussex Posts: 27 |
Sam Motor Machine has an install video on his YouTube channel for a system provided by Unique Auto Developments. There is a follow up video where he reviews the unit after a week of use.
|
||
12th Sep 2022 9:12pm |
|
Kiss My Carbon Footprint Member Since: 19 Dec 2020 Location: Milton Keynes Posts: 119 |
Yes indeed. There is a prior thread discussing these : https://www.fullfatrr.com/forum/topic64367.html And another (in Group Buys) on which members are invited to register their interest in a possible forum discount : https://www.fullfatrr.com/forum/topic64482.html 2011 L322 TDV8 A/b Orkney Grey 2008 Defender 90 XS TDCi Java Black 2002 L322 TD6 Vogue Zambezi Silver (gone but not forgotten) And one or two bikes - Ok, maybe more than one or two.... |
||
15th Sep 2022 3:04pm |
|
Kiss My Carbon Footprint Member Since: 19 Dec 2020 Location: Milton Keynes Posts: 119 |
Chaps,
|
||
23rd Sep 2022 10:17pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis