fullfatrr.com - View topic - Type and size of torx screws for height sensor?

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical (L322) > Type and size of torx screws for height sensor?

Page 1 of 1

Print this entire topic ·

tinribs

Member Since: 23 Jun 2017
Location: UK
Posts: 20

2010 Range Rover Vogue SE TDV8 Galway Green

Type and size of torx screws for height sensor?

Does anyone know the type and size of the torque screws required for the height sensors? I assume they are the same on all L322's, but ours is a 2010 3.6tdv8 if that makes any difference?

Thank you!

30th Jan 2021 1:04am

dhallworth

Member Since: 10 Oct 2011
Location: Glasgow
Posts: 3201

2012 Range Rover Autobiography TDV8 Baltic Blue

If Microcat is right, they are Part HS1 on the attached diagram.

HS1 is an M5 x 12mm Torx bolt.

David.

2002 4.6 Vogue SE - Alveston Red with Lightstone Leather
2012 Range Rover 5.0 SC Autobiography in Indus Silver with Jet/Ivory Interior
2012 Range Rover 4.4 TDV8 Autobiography in Baltic Blue with Sand Interior
2013 Range Rover Sport SDV6 HSE Black Edition in Santorini Black with Ebony Interior

30th Jan 2021 1:25am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum