Trying to activate the menu button on the instrument panel , the manual says just press for a 3-5 secs but not happening.The only thing that may be stopping it working could be that a message is trying to tell me I have a trans safe failure would this interfere with normal operations.

Im confused at what you are trying to do? Regards

Daz

-------------------------
2011 (61plate) 4.4 tdv8
sumatra black

previous cars

e46 m3
e53 x5

Instrument info button will not work, the button on the end of the stalk. Reading the manual you select it to operate from the screen menu but remote doesn’t appear on it , I have seen this work before but for the life of me it doesn’t follow from the book.
Thanks for replying

The button on the left hand stick ( the indicator stalk) will cycle through how much fuel is remaing, mpg, miles driven etc

is this wat you are reffering to? Regards

Daz

-------------------------
2011 (61plate) 4.4 tdv8
sumatra black

previous cars

e46 m3
e53 x5

I’m pretty sure you have to press one of the 2 buttons on the instrument cluster to clear it first.

One resets the trip....it’s the other button.....

From memory anyway.....

 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

dazza1983 wrote:

The button on the left hand stick ( the indicator stalk) will cycle through how much fuel is remaing, mpg, miles driven etc

is this wat you are reffering to?

I haven't got the handbook to hand but you can programme what the button shows - time, date, consumption etc. Could it be that the programming on your button has been wiped and needs to be reset?

IIRC it is programmed via the set up menu. John
2008 Stornoway Grey 3.6 Tdv8 Vogue
2005 TD6 Java Black Vogue - Written off!!
GAP iiD BT
2003 Discovery TD5 Auto, Nanocom Evolution - gone to a new home!
MasseyFerguson 152 - No electronics!! - Sold

You need to clear the warning message before any info comes up.....then take it from there.

 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

Managed to clear the warning this pm which was Trans Failsafe Prog so there are no arrows ,but nothing to aid reset on main centre screen.pressed the button and prolonged pressed as well.

Weegie wrote:

I haven't got the handbook to hand but you can programme what the button shows - time, date, consumption etc. Could it be that the programming on your button has been wiped and needs to be reset?

IIRC it is programmed via the set up menu.

Nothing to aid reset on main centre screen?

I’m a bit lost now.

You mean reset average fuel consumption etc?

Apologies if I’m being thick.... just that the warning on instrument cluster is separate from main centre scree.

 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

Below shows the cars screen

mjdronfield wrote:

Nothing to aid reset on main centre screen?

I’m a bit lost now.

You mean reset average fuel consumption etc?

Apologies if I’m being thick.... just that the warning on instrument cluster is separate from main centre scree.

Using this

Ah, I think I see what you mean now.

Just as an observation, looks like you have BMW firmware on there, so prob have Mk 4 DVD sat nav.

Operation should be mostly similar though. 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

yes changed the DVD to digital , but that shouldn't interfere with the info on instrument screen? Any ideas.

Just had a thought , I have been in the GAP IID Tool lately , mainly to sort out the Transfer box problem , I noticed I could' nt alter things in the the CCF files. I am wandering if I have disabled anything in there.