Advertise on fullfatrr.com »

Home > Technical (L322) > 2011 4.4 TDv8 Judder
Post Reply  Down to end
Page 1 of 2 12>
Print this entire topic · 
joslyn



Member Since: 08 Jun 2018
Location: Oxfordshire
Posts: 3

United Kingdom 2011 Range Rover Autobiography TDV8 Stornoway Grey
2011 4.4 TDv8 Judder

Hi,

I have a 2011 RR 4.4 TDv8. When coming off the throttle at motorway speeds, or cruising with a very slight amount of throttle open, the car will judder. It's a single judder, only lasts for a fraction of a second and feels like the car has had fuel cut off, or the gearbox is between gears.

Absolutely fine under full throttle and all other normal driving conditions. Garages have struggled to replicate and therefore cannot diagnose.

Help, any ideas?

Thanks in advance...

Post #480428 8th Jun 2018 1:04pm
View user's profile Send private message View poster's gallery Reply with quote
stan
Site Moderator


Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 35262

United Kingdom 

yep, mine had that...theres a TSB that involves a software update, LTB00054v2..



my experience,
http://www.fullfatrr.com/forum/topic38291....hesitation ... - .- -.




Y. O. L. O.
.

Post #480437 8th Jun 2018 2:39pm
View user's profile Send private message View poster's gallery Reply with quote
northernmonkeyjones



Member Since: 24 Mar 2012
Location: derby
Posts: 8500

United Kingdom 2016 Range Rover Autobiography SDV8 Santorini Black

as Stan said, theres is a software update to solve this.

Not sure if it is LR only, but I suspect most places with a decent diagnostic rig can fix it with an update, but it wont show a fault when they read the codes, they need to know what to do. if you give them the TSB code above then they should be able to find the software update from that. Thumbs Up There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

Post #480482 8th Jun 2018 9:12pm
View user's profile Send private message View poster's gallery Reply with quote
joslyn



Member Since: 08 Jun 2018
Location: Oxfordshire
Posts: 3

United Kingdom 2011 Range Rover Autobiography TDV8 Stornoway Grey

Brilliant, thanks both.

Annoyingly it was in the main dealer with a description of the fault a while back and I asked for any software updates. They said they could not reproduce so did not do anything!

Post #480485 8th Jun 2018 9:42pm
View user's profile Send private message View poster's gallery Reply with quote
Jamesonfox



Member Since: 06 Sep 2022
Location: Wales
Posts: 22

United Kingdom 

Hi Joslyn,

Did the software update solve your issue? I'm having the same problem you described, though the judder happens at lower speeds too. There is no judder if I kick down the accelerator. But there is when I apply slight acceleration.

Post #644749 4th Oct 2022 2:17pm
View user's profile Send private message View poster's gallery Reply with quote
garyRR



Member Since: 13 Mar 2021
Location: Hampshire
Posts: 1463

United Kingdom 

Sounds more like the torque converter to me but worth a try if there was a technical bulletin. 2015 Range Rover Autobiography 4.4 SDV8

Post #644758 4th Oct 2022 3:45pm
View user's profile Send private message View poster's gallery Reply with quote
Jamesonfox



Member Since: 06 Sep 2022
Location: Wales
Posts: 22

United Kingdom 

garyRR - Would a torque converter issue also cause a slightly rough idle? I also have a fault code indicating a misfire on cylinder 6.

Post #644767 4th Oct 2022 5:10pm
View user's profile Send private message View poster's gallery Reply with quote
garyRR



Member Since: 13 Mar 2021
Location: Hampshire
Posts: 1463

United Kingdom 

A torque converter issue would cause juddering (even slight) when shifting to drive and when pulling off at slow speed or a slow coast.

I mean, it's worth a software update because even at Land Rover main dealer prices, I can't see them charging more than the diagnostics fee (likely <£200) whereas a recon torque converter fitted is c. £1,000+. 2015 Range Rover Autobiography 4.4 SDV8

Post #644768 4th Oct 2022 5:14pm
View user's profile Send private message View poster's gallery Reply with quote
jaguar3



Member Since: 25 Sep 2022
Location: Estonia
Posts: 193

Estonia 2011 Range Rover Vogue SE 4.4 V8 Baltic Blue

Same here. Its common fault on 4,4. I was asking JLR, they say yes, we know what to do. But still have no time to go there and fix it.
And yes, sometime (very rarely) judder also with low speed as well. Its not torque converter, its just cut off injection for a moment.

Post #644769 4th Oct 2022 5:23pm
View user's profile Send private message View poster's gallery Reply with quote
Jamesonfox



Member Since: 06 Sep 2022
Location: Wales
Posts: 22

United Kingdom 

jaguar3 - so what's the fix for this problem? Is it just a software update, or cleaning the injectors or something else entirely? Previously I had a leaking charge hose to the throttle body and a very tiny hole in one of the four short rubber hoses to the donut, all of which I have since replaced. I have also cleaned the MAP and MAF sensors. However, this judder and the P0306–00 (26) fault code remain.

Post #644770 4th Oct 2022 5:44pm
View user's profile Send private message View poster's gallery Reply with quote
Haylands



Member Since: 04 Mar 2014
Location: East Yorkshire
Posts: 8178

England 2014 Range Rover Autobiography SDV8 Loire Blue

Updating software won't fix your misfire issue, I think you need to get that sorted first.... Thumbs Up Pete

__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Parchment over Navy Interior. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand, Jet Interior. Sold
2002 L322 Vogue 4.4 V8 Epson Green, Ivory over Aspen Interior (Fatty Offroader) Sold
-Click for Project Fatty off roader-

Post #644777 4th Oct 2022 6:13pm
View user's profile Send private message View poster's gallery Reply with quote
jaguar3



Member Since: 25 Sep 2022
Location: Estonia
Posts: 193

Estonia 2011 Range Rover Vogue SE 4.4 V8 Baltic Blue

I have not deepened in this problem, so canot say. Just JLR say they know what to do. Iam not driving very often on highway over 120kph (no highways near my), so its not critical to me. Up to 100kph no problems at all.
At lower speed that happened very rarely (2-3 times only as I remember).
I was asking JLR a year ago, so not remember exactly, but they say something about miss of communication between engine and gearbox...or someting like that. But yes, they promese to fix just by updating something.
Due I dont need to drive often fast, still didnt fix it Sad

Post #644781 4th Oct 2022 6:39pm
View user's profile Send private message View poster's gallery Reply with quote
Shaun



Member Since: 02 Jul 2010
Location: Hull
Posts: 58

England 2011 Range Rover Vogue 4.4 V8 Orkney Grey

Had the same problem with hesitation at low speed and sometimes at higher speeds on cruise control. Had a gearbox software update by a local independent, fault has now gone and gearchange much improved. LTB00454v2 - Engine Hesitation/Powertrain Control Module Update (various issues) 2004 TD6 - Gone
2011 4.4 TDV8

Post #644987 7th Oct 2022 9:09am
View user's profile Send private message View poster's gallery Reply with quote
Jamesonfox



Member Since: 06 Sep 2022
Location: Wales
Posts: 22

United Kingdom 

Haylands wrote:
Updating software won't fix your misfire issue, I think you need to get that sorted first.... Thumbs Up


To test the injector in cylinder 6, I switched it with the one in cylinder 7. Still, I received fault code P0306, “misfire detected in cylinder 6”. How strange, I thought.

A friend then suggested that the fault code in fact is indicating a misfire in the 6th position of the cylinders’ firing order: that being cylinder 3 on the TDV8 4.4 engine. Accordingly, I switched that cylinder’s injector with the one now in cylinder 7. However, P0306 still appears, along with a rough idle, fluctuating RPM and a smell of unburned fuel.

I have also checked for continuity on the wires going to the injector in cylinder 6 from the ECM. No apparent issues there.

Is there another way I can test the injectors’ harnesses for short circuits?

Save for doing a cylinder compression test, what other steps could I explore?

Post #645072 8th Oct 2022 11:55am
View user's profile Send private message View poster's gallery Reply with quote
JayGee



Member Since: 27 Jul 2021
Location: London
Posts: 3187

United Kingdom 2012 Range Rover Vogue 4.4 V8 Orkney Grey

Can you smell diesel in the engine bay or is it in the exhaust? 2012 TDV8 Vogue (L322)

Post #645073 8th Oct 2022 12:05pm
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 1 of 2 12>
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site