I haven't got overheating problems as of yet! But I'm not the biggest fan of viscous, as they very regularly seem to half work, i.e. they slip and don't shift all the air that they are supposed to

While sitting in miles of traffic the other day, praying that the car wouldn't totally self destruct, I did here the fan engage, but it seemed to go quirt as I pulled away, as if it was OK below 2000 rpm but gave up the ghost over 2000 rpm. Got me a wee bit concerned

Anyway now that i have limped it home, it would seem to be pointing towards a fubar'd injector . But at the time of Sod's intervention, I had just climbed up a 3 mile hill towing 2.5 tons, and I thought that heat might factor in the engines demise. Plus I was beginning to wonder if the the temp gauge was telling porkies, as it never went over half ( suddenly remembered how unreliable the shogun temp gauges were, when they read hot the engine is already in meltdown ). So nothing to really worry about, other than the car has just developed a bad case of clutch judder.... and I haven't got a clutch  Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

The temp gauge reads "what the driver expects to see" (same for most cars these days) it will get to normal at around 80deg and then not move of normal until it gets to well over 110deg, this is for the hot running petrol, not sure on the diesel... maybe an idea to stick an actual gauge on the engine and see what it's doing...

Good luck with the filter/injector... hope it's a cheap fix... my old petrol classic had a similar issue and that was the petrol filter so hopefully you will be lucky... Pete
I now have permission from the boss to use Y.O.L.O. Enjoy life
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click for Project Fatty off roader-

well.. it's in and working. Wasn't that easy, I think the td6 engine is a little longer it was a tight fit and had to do some trimming on the fan body to get the inter-cooler hose back in place. But overall it was not that difficult, thanks for your help. cars on the side;
Audi A8 W12
560 SEC AMG Widebody '86
500 SE '86

Glad you got it sorted.....  Pete
I now have permission from the boss to use Y.O.L.O. Enjoy life
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click for Project Fatty off roader-

djharm, Have you got any pictures of the install? Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

miggit wrote:

I haven't got overheating problems as of yet! But I'm not the biggest fan of viscous, as they very regularly seem to half work, i.e. they slip and don't shift all the air that they are supposed to

While sitting in miles of traffic the other day, praying that the car wouldn't totally self destruct, I did here the fan engage, but it seemed to go quirt as I pulled away, as if it was OK below 2000 rpm but gave up the ghost over 2000 rpm. Got me a wee bit concerned

Anyway now that i have limped it home, it would seem to be pointing towards a fubar'd injector . But at the time of Sod's intervention, I had just climbed up a 3 mile hill towing 2.5 tons, and I thought that heat might factor in the engines demise. Plus I was beginning to wonder if the the temp gauge was telling porkies, as it never went over half ( suddenly remembered how unreliable the shogun temp gauges were, when they read hot the engine is already in meltdown ). So nothing to really worry about, other than the car has just developed a bad case of clutch judder.... and I haven't got a clutch

Right hoe then, mental note to one's self, gauge is as good as a chocolate fire guard

Reminds me of my old Shogun, the gauge read normal right up to the point of thermal melt down was the cause of many an engine to end prematurely

Does anyone know the safe operating range of a TD6? and wot's the ID of the top hose? I was thinking of using a fixed temp switch instead of adjustable, then I could let it in to the top hose using one of those cast ally adapters for temp sender units. And I do know that it will need adapting, by a strange coincidence most of the switches are M14x1.5, that's wheel stud size, wonder who has that in his tool box

Oh and Good News, I have just procured a complete fan assembly with all the wiring for £20.50 I just love fleabay! Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

Never had much success with the fixed temp switches... either comes in too early or late... an adjustable one and you can crank it up a bit if doing towing etc to keep the engine cool rather that waiting for it to get hot.....

Get one of these

http://www.ebay.co.uk/itm/Adjustable-Elect...2c84fd874c

Cut the top hose in half and use one of these....

http://www.ebay.co.uk/itm/New-Alloy-Alumin...2c759e2647

Works fine on mine....  Pete
I now have permission from the boss to use Y.O.L.O. Enjoy life
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click for Project Fatty off roader-

Pete, out of interest what have you got yours set on? I can see that it could be an advantage to have it adjustable, but I'm wary about a) the quality of the switches as they are from Ping Pong, b) getting a descent seal between the hose, joiner and capillary pipe, with out crushing the capillary pipe.

That has been the my number one bug bare about Kenlow, just poking it in to the hose and clamping it up, looks bodged and a possible failure spot for the cooling system. I was hoping to produce something a little more ascetically pleasing. Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

Right I've just taken a punt on an adjustable switch, found it on the web, not fleabay, and at £12.95 if it's no good then I haven't wasted too much dosh

Half way down the page http://www.bbclassics.co.uk/electrical-accessories.html Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

Mine is set to high 90's I'm running an 80deg stat at the moment, Top hose temp normally sits around the 88deg mark but does rise quickly when in traffic...

Sealing can be a problem, have you used the little slither of rubber that Kenlowe supply with theirs?? Pete
I now have permission from the boss to use Y.O.L.O. Enjoy life
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click for Project Fatty off roader-

Kenlow slither? No, cos I haven't got one, but I do know what you mean Was thinking along the lines of a bit of self amalgamating tape or a slither of ex rubber hose. I'm sure that I can find something to soften the underside of the joint

Oh and I haven't actually started yet, pick up the fans tomorrow, and wait on the post for the switch. Just got to source a fuse and holder, and work out what size joiner I will need after I have cut the hose. As it's silly season for my line of work, I can't really afford any down time, so if I can spare a day to fit I will, otherwise it will have to wait until work goes quirt  Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

Right I now have everything on its' way, including the Kenlowe seal,

Click image to enlarge

I'll have one off you... PM on way...  Pete
I now have permission from the boss to use Y.O.L.O. Enjoy life
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click for Project Fatty off roader-

djharm wrote:

Click image to enlarge

Looking good. Don't know if I can find one from a X-type on short notice.
Was looking at this thermostat.