Home > Maintenance & Mods (L322) > Applying RR lettering without template |
|
|
Alistair Member Since: 11 Feb 2011 Location: Peterborough / Bordeaux / Andorra Posts: 7926 |
Nice job |
||
1st May 2015 10:51pm |
|
miggit Member Since: 12 Jul 2014 Location: Milton Keynes Posts: 3657 |
I think I might have got it wrong
|
||
1st May 2015 11:21pm |
|
supershuttle Member Since: 20 Mar 2011 Location: Lancashire Posts: 3783 |
Good tip with the floss, another method is to make a template (before removing them) with some old greetings card and some masking tape, I actually reused the old letters including "VOGUE" and the bar above the number plate, just sprayed them with some silver wheel paint and stuck 'em back on with double sided tape , obviously you can't have the hi chrome finish doing this - but no money changes hands
|
||||||
2nd May 2015 5:47am |
|
Fish Member Since: 30 Aug 2014 Location: Bolton Posts: 301 |
That's going to bug me now, I hadn't noticed
|
||
2nd May 2015 8:34am |
|
Cam-Tech-Craig Member Since: 03 Aug 2011 Location: Gloucestershire Posts: 16284 |
Definitely body colour Fish... |
||
2nd May 2015 8:48am |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35290 |
nice job Mark, i've put this in the wiki.. ... - .- -.
|
||
2nd May 2015 9:31am |
|
markcaughey Member Since: 03 Nov 2014 Location: Glasgow Posts: 316 |
Cheers Stan Range Rover Vogue 2006 4.4 AJV8 | Buckingham Blue | Parchment Leather | Supercharged Grill+Side Vents | CA02 HEY ( NOT 02 PLATE ) |
||
2nd May 2015 12:13pm |
|
RRUK Site Supporter Member Since: 08 Jun 2007 Location: UK Posts: 6366 |
Never trust the so called template that the lettering sets come in, the first time I used one, I applied it and they were all wonky, much better to do as here and just apply yourself one by one, this is what I did with mine. Discovery 4 HSE
|
||
2nd May 2015 12:54pm |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8195 |
Mark,
|
||
2nd May 2015 1:08pm |
|
supershuttle Member Since: 20 Mar 2011 Location: Lancashire Posts: 3783 |
Sorry about the "G" I just used Simoniz 5 wheel silver Geoff |
||
2nd May 2015 1:40pm |
|
BMG Member Since: 26 Feb 2019 Location: Kent Posts: 196 |
Are there any measurements for the rear lettering ? The badging on mine looks to have been changed and was rather wonky. I have lettering but no template.
|
||
27th May 2019 12:03am |
|
BMG Member Since: 26 Feb 2019 Location: Kent Posts: 196 |
Any chance someone with a car at home with a tape measure can tell me the distance from the lower edge if the tailgate to the low edge of the lettering ?
|
||
28th May 2019 2:04pm |
|
Weegie Member Since: 09 Jun 2014 Location: East Sussex Posts: 3233 |
4.5 cm on mine. Ie. four and a half centimetres . Straight line so all that distance. John
|
||
28th May 2019 2:39pm |
|
Woofster Member Since: 12 Jul 2018 Location: Toronto Posts: 121 |
I recorded 1" (or about 25 mm) from the top of the grey plastic tailgate trim strip to the bottom of the letters. 2010 RR SC
|
||
28th May 2019 3:44pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis