hello

i have a 2007 TDV8 Vogue.

In the last couple of weeks I have started to notice a problem with my parking sensors. For some reason the light on button on the centre console flashes and all I hear is an elongated beep and regardless of how close I am to objects I am no longer getting the proximity beeps.

Does anyone have any ideas what might be up? Is it a common fault, or is there something I could do to test the system?

I had wondered if where i had recently used polish on the body i had not removed it all, With this in mind i went around to all sensors with a microfibre to make sure it had all been removed, but the issue is still the same.

Help please?

Sounds like a duff sensor or damage wiring. If you have a fault reader it may tell you which one is duff. If not put sensors on and listen to each sensor. As you get close to with your ear you should hear it click quietly. If they click the sensor is fine. This should help narrow down the problem. If more than one is duff maybe wiring loom. I had a problem with the rear loom on an 06.

Edit. This post has some details. http://www.fullfatrr.com/forum/topic3366.h...eck+cheque

Thanks for the information. i went around all of the sensors and none of them are clicking.

I have the car in for a service on Wednesday, so I will ask them to check it out.

Thanks for the information, it is really appreciated

j

Or you sit in the car with the sensors activated, then get someone to put their hand in front of each sensor in turn. Being activated should make the constant beep become the usual beep beep until you reach the duff one(s) Discovery 4 HSE
1998 110 TUM HS FFR Hard Top XD WOLF
1982 Series 3 Hard Top

*Gone:L462 D5 HSE LUX, L663 Defender 110 HSE, Discovery 3 HSE, 2014MY Range Rover Sport 5.0 Supercharged AB Dynamic; L405 Exec Vogue SE 4.4, 5.0 Supercharged Autobiography, Defender TDCi XS CSW, Defender TD5 HT, Vogue SE TDV8, Vogue TD6, RRSport SC 4.2V8, Classic 3.9 Vogue Auto, Land Rover Series 3 SWB

Edited due to below:

Loom seems likely and easy to replace at the back.

Last edited by Gazellio @ Prestige Cars on 21st Apr 2015 6:54am. Edited 1 time in total

Front loom cannot just replace as its part of the main harness...

Okay, thanks everyone diagnosed as a single front sensor. All to be sorted in a couple of days.