Home > Technical (L322) > HOMELINK |
|
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35265 |
you're probably doing this anyway but here's a youtube video explaining the procedure,
|
||
19th Feb 2015 1:12pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35265 |
..and the homelink web page,
|
||
19th Feb 2015 1:15pm |
|
NeinFondue Member Since: 05 Dec 2014 Location: Berkshire Posts: 22 |
That is great Stan thank you.. I'll give them a go this weekend as the one thing I didn't test was the additional steps requited for rolling code systesm.. |
||
19th Feb 2015 1:40pm |
|
DrF Member Since: 30 Jun 2014 Location: South East Posts: 1386 |
Hi,
|
||
19th Feb 2015 4:48pm |
|
NeinFondue Member Since: 05 Dec 2014 Location: Berkshire Posts: 22 |
That is my fear... However, I'm going to be optimistic and give it one last try. Sadly if I'm unsuccessful, having the transponders in the gate changed out isn't an option as it is shared and maintained by the management company.. Garage doors on the other hand are my own and I could swap out if required.. |
||
19th Feb 2015 4:57pm |
|
axle Member Since: 28 Oct 2007 Location: Perth Perth the end of the Earth Posts: 2964 |
Homelink works on old doors and gates provided the frequency is the same , the problem I have found is the new stuff with 2.0+ encryption is too far ahead . I even bought Homelink signal converter from the states to get the system to catch up but no luck so far and I have been trying for a year off and on to make it work . 2008 MY Supercharged
|
||
20th Feb 2015 1:03am |
|
RRTIM Member Since: 13 Dec 2013 Location: Wolverhampton Posts: 73 |
Ours works finr.
|
||
25th Feb 2015 3:52pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis