Home > Maintenance & Mods (L322) > Should I be worried? |
|
|
ebajema Member Since: 24 Mar 2011 Location: New Plymouth Posts: 4782 |
Maybe the particle filter is glogged up due to lot of town driving ?? Or a turbo hose has split, seems to happen from time to time. MY 2010 5.0 SC Galway green and sand interior!!
|
||
24th Jul 2014 3:04pm |
|
alanm_3 Member Since: 19 Feb 2011 Location: my House, unless I’m not at home, in which case I’m somewhere else. Posts: 6719 |
I did think that Eugene, as my dear wife has been using it lately for a lot of stop/start driving.
|
||
24th Jul 2014 3:10pm |
|
Full Fat Ray Member Since: 23 Jan 2014 Location: Cwm Llinau Posts: 574 |
P023D, something to do with your turbo, P0480 low speed cooling fan - if you google these (as I have just done), there is quite a lot of info, a good thread on RRsport leading to Disco 3 with a few things you can check.
|
||
24th Jul 2014 3:12pm |
|
Googsy Member Since: 02 Jun 2011 Location: Where men are men and sheep are nervous. Posts: 2947 |
Turbo hose? Present :2008 TDV8 HSE
|
||
24th Jul 2014 3:36pm |
|
alanm_3 Member Since: 19 Feb 2011 Location: my House, unless I’m not at home, in which case I’m somewhere else. Posts: 6719 |
I did find some details about these kind of codes. Most pointed to a MAP (or was that a typo and should be MAF) sensor, getting clogged up.
|
||
24th Jul 2014 3:40pm |
|
alanm_3 Member Since: 19 Feb 2011 Location: my House, unless I’m not at home, in which case I’m somewhere else. Posts: 6719 |
Well I've stocked up on a family sized tub of KY in preparation for the verdict on this tomorrow Got - 2017 SDV8 Autobiography in Loire Blue
|
||
31st Jul 2014 12:25am |
|
ebajema Member Since: 24 Mar 2011 Location: New Plymouth Posts: 4782 |
It may not be a typo. The MAF (Mass Air Flow) sensor sits just behind the air filter, measuring the amount of air flowing in. The MAP measures the pressure in the inlet manifold and is a lot harder to reach (well on the SC models, it is fitted on the firewall side of the engine).
|
||
31st Jul 2014 1:30am |
|
Mikey Member Since: 10 Jan 2008 Location: Dundee Posts: 1750 |
An 08MY shouldn't have a DPF, so my money is on a split turbo hose |
||
31st Jul 2014 6:42am |
|
JAMIE_M Member Since: 01 Apr 2014 Location: South Wales Posts: 9 |
Spooky - Ive just posted the on this very subject on another forum on here. Had precisely the same occurrence a few weeks ago - but mine had not been start stop it had just ferried us 350 miles in luxury. But Day 1 same bing-bong and rectification as you describe. By day 2 and 3 I could predict the precise place on a hill it would happen. Met up with my indie, engine cover off - n/s bank, split you could put three finger in hiding behind the mesh. I had some other work done; new discs and pads up front, and new wiper blades all up = £380, which makes me think that the hose and fitting was about £60+£40 hope you find this is your problem |
||
31st Jul 2014 8:44am |
|
alanm_3 Member Since: 19 Feb 2011 Location: my House, unless I’m not at home, in which case I’m somewhere else. Posts: 6719 |
My fingers and wallet are crossed that it's a hose! Got - 2017 SDV8 Autobiography in Loire Blue
|
||
31st Jul 2014 9:47am |
|
JAMIE_M Member Since: 01 Apr 2014 Location: South Wales Posts: 9 |
Not an expert, however having seen the sub 45 second it took for the indie to find the problem, here's what he did should you choose to try it.
|
||
31st Jul 2014 9:52am |
|
alanm_3 Member Since: 19 Feb 2011 Location: my House, unless I’m not at home, in which case I’m somewhere else. Posts: 6719 |
I'm 500 miles away from where the cars going in, but it's in good hands.
|
||
31st Jul 2014 9:57am |
|
JAMIE_M Member Since: 01 Apr 2014 Location: South Wales Posts: 9 |
Cant say I did... and the hoses are on the top of the engine.. I |
||
31st Jul 2014 10:06am |
|
Mikey Member Since: 10 Jan 2008 Location: Dundee Posts: 1750 |
A "fluttering" noise at anything under 2500-3000rpm? |
||
31st Jul 2014 2:20pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis