Advertise on fullfatrr.com »

Home > Technical (L322) > can anyone help please. message centre problem
Post Reply  Down to end
Page 2 of 3 <123>
Print this entire topic · 
Simes



Member Since: 30 Aug 2011
Location: Hinckley
Posts: 964
United Kingdom 2011 Range Rover Autobiography Black TDV8 Barolo Black

Jackofq300 wrote:
great thank you lads. when i turn the camera alert on it changes back to english. and says "check front side light" but the lights are fine. ive got a 2010 front convertion so the lights are led and working fine. ive had the car about 3 months now and this problem only ocurred a couple of days ago. any ideas how to fix this little bug peeps?? the diagnostic tool does not switch it off worst luck.


As Stan said, with NAvcoder you can switch off the monitoring of the bulbs, but I suspect the root cause is that the LED canbus resistor has failed and therefore is triggering a fault message. Try a new set of bulbs.

Glad my Portuguese translation was right!
Post #220443 3rd Nov 2013 8:27am
View user's profile Send private message View poster's gallery Reply with quote
Robert



Member Since: 25 Oct 2011
Location: Perigueux
Posts: 2288
France 2007 Range Rover Vogue 4.4 V8 Zambezi Silver

Sorry for being late, but it is French indeed, verifier feu (feux) position avant, check front light(s) and you did find the solution already, so this reply is completely overdone. Sorry Embarassed
Post #220448 3rd Nov 2013 9:16am
View user's profile Send private message View poster's gallery Reply with quote
Jackofq300



Member Since: 11 Aug 2013
Location: Dart ford
Posts: 45
United Kingdom 2002 Range Rover HSE 4.4 V8 Zambezi Silver

ok thank you stan. i bet them led bulbs are expensive. i might just griin n bear it for now. would my id tool be able to turn off hot and cold monitoring? never seen that in the menu..
Post #220719 4th Nov 2013 5:25pm
View user's profile Send private message View poster's gallery Reply with quote
Simes



Member Since: 30 Aug 2011
Location: Hinckley
Posts: 964
United Kingdom 2011 Range Rover Autobiography Black TDV8 Barolo Black

The bulbs cheap enough - and the LEDs are only about £3 each. If you go with the LEDs you need to use iid or nav - coder to switch off the cold monitoring anyway, otherwise they flash like a disco every 40 seconds.
Post #220721 4th Nov 2013 5:28pm
View user's profile Send private message View poster's gallery Reply with quote
stan
Site Moderator


Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 35272
United Kingdom 

^ what Simon said Paul.. ... - .- -.




Y. O. L. O.
.
Post #220722 4th Nov 2013 5:35pm
View user's profile Send private message View poster's gallery Reply with quote
Jackofq300



Member Since: 11 Aug 2013
Location: Dart ford
Posts: 45
United Kingdom 2002 Range Rover HSE 4.4 V8 Zambezi Silver

ok thanks simon and thanks again stan. just one more thing. where would i get a nav coder or iid from. im thick as you have probably worked out but i have never heard of them.
Post #220730 4th Nov 2013 5:59pm
View user's profile Send private message View poster's gallery Reply with quote
stan
Site Moderator


Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 35272
United Kingdom 

britpart are the main distributor for the iidtool and if you contact them they will supply a list of dealers, or you could try ebay...
not sure re the nav-coder , maybe ebay? .. ... - .- -.




Y. O. L. O.
.
Post #220734 4th Nov 2013 6:03pm
View user's profile Send private message View poster's gallery Reply with quote
Jackofq300



Member Since: 11 Aug 2013
Location: Dart ford
Posts: 45
United Kingdom 2002 Range Rover HSE 4.4 V8 Zambezi Silver

i have a britpart id tool. can it be done with that? or does it have to be the nav coder
Post #220737 4th Nov 2013 6:07pm
View user's profile Send private message View poster's gallery Reply with quote
Jackofq300



Member Since: 11 Aug 2013
Location: Dart ford
Posts: 45
United Kingdom 2002 Range Rover HSE 4.4 V8 Zambezi Silver

i have a britpart id tool. can it be done with that? or does it have to be the nav coder
Post #220738 4th Nov 2013 6:08pm
View user's profile Send private message View poster's gallery Reply with quote
stan
Site Moderator


Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 35272
United Kingdom 

the GAP iidtool should be able to do it, have a look here and enter your details in the drop down menu,




http://www.gap-diagnostic.com/products/iidtool.html ... - .- -.




Y. O. L. O.
.
Post #220739 4th Nov 2013 6:09pm
View user's profile Send private message View poster's gallery Reply with quote
stan
Site Moderator


Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 35272
United Kingdom 

edit, it appears you can...[last item]


Click image to enlarge
 ... - .- -.




Y. O. L. O.
.
Post #220740 4th Nov 2013 6:12pm
View user's profile Send private message View poster's gallery Reply with quote
Jackofq300



Member Since: 11 Aug 2013
Location: Dart ford
Posts: 45
United Kingdom 2002 Range Rover HSE 4.4 V8 Zambezi Silver

ok will do. thank you
Post #220743 4th Nov 2013 6:27pm
View user's profile Send private message View poster's gallery Reply with quote
Jackofq300



Member Since: 11 Aug 2013
Location: Dart ford
Posts: 45
United Kingdom 2002 Range Rover HSE 4.4 V8 Zambezi Silver

ok will do. thank you
Post #220747 4th Nov 2013 6:47pm
View user's profile Send private message View poster's gallery Reply with quote
stan
Site Moderator


Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 35272
United Kingdom 

thats ok mate, you dont have to thank me twice.. Laughing ... - .- -.




Y. O. L. O.
.
Post #220753 4th Nov 2013 7:44pm
View user's profile Send private message View poster's gallery Reply with quote
Jackofq300



Member Since: 11 Aug 2013
Location: Dart ford
Posts: 45
United Kingdom 2002 Range Rover HSE 4.4 V8 Zambezi Silver

ok ok lol.just enjoying the great feedback on this forum. and cheers for the id tool thread. ive just lowered the RR by 55mm.
Post #220816 4th Nov 2013 10:47pm
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 2 of 3 <123>
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site