Key arrived and looks great, bit confused though what position do I have to put the key to in the ignition to allow me to sync the keys  Now: BMW 640d M Sport, Alpine White
Gone: Range Rover 4.4 V8 Vogue, Zambezi Silver, Charcoal Oxford Leather
Also: Mk1 Audi TT 1.8T Quattro, Brilliant Black
[URL=]

Click image to enlarge

andy, use your original key to start the sync process, put it in the ignition turn to point one then off and remove the key, start the sync process with the new key or keys and then sync your old key if you going to keep it.

you need to sync all keys that you want to work with your locking in one session. V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

Key arrived today, followed your instructions and synced at first attempt, got baled cut and assembled with transponder from old key and everything works. Have glued the two halves together.

You are a star Daveo, many thanks for making this happen  Should've been old enough to know better...doh!
Current 2010 5.0 SC Autobiography
Previous 2006 TD6 Vogue SE
Previous 1998 P38 4.6 Vogue Autobiography 50 (No 10)

Cheers Dave mine arrives sync first time.
just need key cutting, who does everyone use to cut keys?

My postman needs to pull his finger out!

Key now sync'd to the car, taking it to Timsons tomorrow during my lunch hour and I'll get the chip swapped over tomorrow evening  Now: BMW 640d M Sport, Alpine White
Gone: Range Rover 4.4 V8 Vogue, Zambezi Silver, Charcoal Oxford Leather
Also: Mk1 Audi TT 1.8T Quattro, Brilliant Black
[URL=]

Click image to enlarge

Hi everyone, well, thanks to Daveo, I now have a lovely, fully operational flip key! Blade was cut today on an all singing all dancing laser jig thingy in Southampton, and works perfectly!

I was worried whether it would go in far enough since the key slot on the early cars is recessed, but it does!

Btw, key was cut by County Locksmiths,Bitterne, Southampton. Lovely guys, proper kit, can recommend them. (No affiliation other than a satisfied customer!)

Any recommendations on glue for sticking the casing together? Now: BMW 640d M Sport, Alpine White
Gone: Range Rover 4.4 V8 Vogue, Zambezi Silver, Charcoal Oxford Leather
Also: Mk1 Audi TT 1.8T Quattro, Brilliant Black
[URL=]

Click image to enlarge

I just used a tiny dab of contact adhesive. Didn't want it to be impossible to take part in the future!

If anyone finds a source for "Range Rover" logos for keys (14mm is pretty standard) let me know as I would like to replace the green land rover with a black range rover....

I didn't get any badge? Now: BMW 640d M Sport, Alpine White
Gone: Range Rover 4.4 V8 Vogue, Zambezi Silver, Charcoal Oxford Leather
Also: Mk1 Audi TT 1.8T Quattro, Brilliant Black
[URL=]

Click image to enlarge

hi andy, small over sigh, will pop it in the post.. V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

Dave
Sorry to be a pain but I didn't get a badge either

ok no probs, i will pop it in the post... V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

All done.

Thanks very much Dave.