Just to prove to myself I wasn't going mad, I've checked, and rechecked and checked again, and I don't have the "Key in ignition warning if door is opened" as documented below.
Also I notice that I have options to change the %age of light that the main beam DRLs work at, which isn't mentioned below?

Any reason mine should be different?




LCM-LIGHT CONTROL

Daytime Running Light ( High Beam, Main Beam or None )
Follow me home with reverse lamp
FMH Front fog lamps
FMH Front position lamps
FMH High beam headlamps
FMH License plate light
FMH Low beam headlights
FMH Rear position lamps
FMH Reverse lamp (LCM Coding Index 11 only)
FMH Style
Follow Me Home ( FMH ) cancel with lighting switch
Front fog lights off if main beam on
Handbrake turns off Daytime Running Lamps
Key in ignition warning if door is opened
Main beam dim with DRL
Time in seconds for Follow Me Home ( FMH ) Got - 2017 SDV8 Autobiography in Loire Blue
Had- 2008 TDV8 Vogue SE in Java black
Had - 2007 S/C in Stornoway Grey

Hi Alan,
The key bong eliminator was added after a request by Cam Tech Craig. So you'll need to update your IIDTool again. You
can delete the IIDTool updater files and program (uninstall) from your PC and then follow the original procedure to update your IIDTool again. The only difference will be that the updater will pop up a box staing that you already have v2.17 and if you'd still like to update to the same version.
Cheers!
Steve 
RRC 2Dr, RRC 4Dr,
P38, and 2 L322s
(wife thinks I'm nuts - prob right, too)

Thanks Steve, I'll do that and give it a go!


 Got - 2017 SDV8 Autobiography in Loire Blue
Had- 2008 TDV8 Vogue SE in Java black
Had - 2007 S/C in Stornoway Grey

ok, i have been looking at the IIDTOOL, I have the rover com unit from RSW and dont get me wrong its great but its not moving along as quick as i would like it to, still waiting for the LCM programming to come along as well as the rain sensor settings,
now does the IID TOOL connect to your laptop as well,i have seen it used as a stand alone unit V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

the IIDTool only connects to the laptop/pc when new firmware is needed dave...stick in the obd port and the settings are adjusted from the cruise controls on the steering wheel... ... - .- -.




Y. O. L. O.
.

SteveMFr wrote:

Hi Alan,
The key bong eliminator was added after a request by Cam Tech Craig. So you'll need to update your IIDTool again. You
can delete the IIDTool updater files and program (uninstall) from your PC and then follow the original procedure to update your IIDTool again. The only difference will be that the updater will pop up a box staing that you already have v2.17 and if you'd still like to update to the same version.
Cheers!
Steve

Thank you Steve, i did'nt even realise you have done it... Ill get on it now sir...


Craig

The key bong used to really pi55 me off - IID Tool has made it magically disappear  Stolen / Gone: 2006MY Supercharged LPG Autobiography - Zambezi Silver with Sand/Jet/Jet Oxford Leather.....

tbh i didnt realise how annoying it was until i dis-abled it. ... - .- -.




Y. O. L. O.
.

I am trying to update my soft ware but when I press the Find Device button it says it can not find it although the laptop has already said it has found new hardware. Any suggestions from you more computer literates would be good thanks.

Keith 2010 3.6TDV8 Stornoway Grey/ Black interior - gone
2005 4.4V8 (M62) Bonatti Grey/ Parchment interior - gone
1998 4.6HSE Blue/ Cream interior (can't remember exact colours) - gone
1977 White - gone (should have kept)

reboot the laptop and try again.. ... - .- -.




Y. O. L. O.
.

Still no luck. It bongs when I plug it in but does not show up as connected in "my computer" and the firmware updater says its not there. 2010 3.6TDV8 Stornoway Grey/ Black interior - gone
2005 4.4V8 (M62) Bonatti Grey/ Parchment interior - gone
1998 4.6HSE Blue/ Cream interior (can't remember exact colours) - gone
1977 White - gone (should have kept)

by coincidence i had this with my iphone today..try different a cable, re-install the gap downloader..all the kind of things that might be causing your problem..

last thought , does the unit work on the range? ... - .- -.




Y. O. L. O.
.

I have tried a different cable and reloading the software, perhaps its time for an email to Gap. The unit works fine on the vehicle 2010 3.6TDV8 Stornoway Grey/ Black interior - gone
2005 4.4V8 (M62) Bonatti Grey/ Parchment interior - gone
1998 4.6HSE Blue/ Cream interior (can't remember exact colours) - gone
1977 White - gone (should have kept)

unlikely it would be the unit if it works on the range...can you try another laptop/pc.. ... - .- -.




Y. O. L. O.
.

update on mine,

alarm chirp now working due to a replacement alarm module being fitted...any way of increasing the volume of the chirp steve?

still cant access the drl menu. ... - .- -.




Y. O. L. O.
.