![]() | Home > In Car Electronics (L322) > Westfalia 13 Pin Electrics - Question about Socket |
![]() ![]() |
|
|
JustinP Member Since: 24 Oct 2010 Location: Cambridge Posts: 889 ![]() ![]() ![]() |
Hi Colin, I've got the dual 7 pin sockets, and both open to the side. |
||
![]() |
|
CG-SC Member Since: 06 May 2011 Location: Falkirk Posts: 528 ![]() ![]() |
Thanks Justin, that's confirmed it.
|
||
![]() |
|
JustinP Member Since: 24 Oct 2010 Location: Cambridge Posts: 889 ![]() ![]() ![]() |
I fitted using two of the black plastic nuts that the plastic boot floor side panels are fitted with.
|
||
![]() |
|
CG-SC Member Since: 06 May 2011 Location: Falkirk Posts: 528 ![]() ![]() |
Who's Julian? |
||
![]() |
|
Johnte Member Since: 23 Aug 2010 Location: North Yorkshire Posts: 741 ![]() ![]() |
I got Westfalia, mine would only fit sideways .... and I also used a couple of the plastic nuts that were holding the boot floor trim down |
||
![]() |
|
IanV8 Member Since: 14 Jan 2010 Location: Dunfermline Posts: 502 ![]() ![]() ![]() |
The 13 pin socket on my Westfalia opens vertically.
|
||
![]() |
|
kingpleb Member Since: 07 Jun 2011 Location: Maybe here. Maybe there, I get everywhere! Posts: 8455 ![]() ![]() ![]() |
My LR sockets allowed plenty of flexibility, though i fitted mine to open left and right diagonally (12s/n sockets) as if it opens straight up it fits right against the bumper so its a PITA to get the sockets out when unhitching |
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)