| Click image to enlarge |
Well, I pulled the PDC module out, took it apart, the contacts on the plugs showed signs of corrosion, opened up the unit, in the bottom is green corrosion , the board had corrosion on it, cleaned it up, but on close inspection, you can see there is damage there, as it’s gone black.
Replacement found on eBay, same P/N £80.
I suspect water has got in, seems to be a common problem, my board is not as bad as some I’ve seen pictures of, rust has got in.
Hopefully this is the issue, will VHB the back of the replacement unit, stick it back on sideways, stop water ingress.
The 3 connectors also showed signs of corrosion.
Will see if this fixes the problem.
| Click image to enlarge | Check out my YouTube channel
https://youtu.be/UHBbLWZXw4A
|