Home > In Car Electronics (L322) > Heated door mirrors ? |
|
|
espaceboy Member Since: 02 Aug 2014 Location: Fae Fife Posts: 86 |
Perhaps just remove the glass, be brave with a wide leaver
|
||
2nd Oct 2014 5:36pm |
|
Steverr Member Since: 27 Oct 2013 Location: Bristol Posts: 191 |
Does the glass just pop out ? |
||
2nd Oct 2014 6:07pm |
|
espaceboy Member Since: 02 Aug 2014 Location: Fae Fife Posts: 86 |
Yes it does, again rave gives you some tips
|
||
2nd Oct 2014 6:10pm |
|
mike37 Member Since: 17 Nov 2013 Location: East Mids Posts: 36 |
I thought they only came on with the front demist program? |
||
3rd Oct 2014 5:41am |
|
mjdronfield Member Since: 04 Nov 2011 Location: Derbyshire Posts: 7799 |
I thought they only came on below a certain temp.
|
||
3rd Oct 2014 5:58am |
|
RP123 Member Since: 06 Jul 2014 Location: Highlands Posts: 187 |
Just checked my handbook - says they come on automatically when a certain temp is reached (no idea what temp though) !!
|
||
3rd Oct 2014 7:52am |
|
Steverr Member Since: 27 Oct 2013 Location: Bristol Posts: 191 |
|
||||
3rd Oct 2014 5:42pm |
|
Steverr Member Since: 27 Oct 2013 Location: Bristol Posts: 191 |
Ok just found a fault on the IDD tool saying...AO driver door mirror heater: open circuit
|
||
10th Oct 2014 3:07pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35293 |
open circuit means a break in the supply of power , maybe the wires are chaffed or broken? ... - .- -.
|
||
10th Oct 2014 3:14pm |
|
Steverr Member Since: 27 Oct 2013 Location: Bristol Posts: 191 |
Ok Stan thanks, will investigate further!!! |
||
10th Oct 2014 4:15pm |
|
kingpleb Member Since: 07 Jun 2011 Location: Maybe here. Maybe there, I get everywhere! Posts: 8455 |
Take the glass out and test by supplying 12v if they warm then the glass is fine and the real fun begins. The two cables run in through the door behind the door card to their own connector IIRC. From there they go into the door loom and then into a whole army of cables FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
|
||
13th Oct 2014 1:35pm |
|
Steverr Member Since: 27 Oct 2013 Location: Bristol Posts: 191 |
thanks for that ... Can't wait |
||
13th Oct 2014 6:31pm |
|
Steverr Member Since: 27 Oct 2013 Location: Bristol Posts: 191 |
Ok checked the glass on the mirrors.. One heated up the other didn't !!!
|
||
19th Oct 2014 3:16pm |
|
SFM Member Since: 19 Feb 2012 Location: dordogne Posts: 258 |
So, if we are above a certain temperature, they will not work?
|
||
9th Feb 2024 3:32pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis