Home > Maintenance & Mods (L322) > Seat belt replacement |
|
|
Sleepy Jen Member Since: 15 Feb 2021 Location: Basingstoke Posts: 32 |
They are pretty easy for a competent DIYer, just follow the workshop manual and common sense. |
||
22nd Apr 2022 12:47pm |
|
Ffrr-lover Member Since: 04 May 2021 Location: Lincolnshire Posts: 640 |
Have you tried cleaning them?
|
||
22nd Apr 2022 2:16pm |
|
TDV8 Paul Member Since: 30 Nov 2020 Location: Tadworth Posts: 223 |
Is this tea a thing then? The old polish trick? All my seatbelts take an age to retract and it’s very annoying especially when unknowing passengers shut the door and trap the belt buckle- such a rewarding noise…… 2009 (2010 MY) 5.0 Supercharged Autobiography
|
||
23rd Apr 2022 7:49am |
|
Ffrr-lover Member Since: 04 May 2021 Location: Lincolnshire Posts: 640 |
Whilst I can say that when cleaned and polish applied, they do retract much more quickly! What I cannot say is how long it lasts for as my attempt was half arsed.
|
||
23rd Apr 2022 8:05am |
|
TDV8 Paul Member Since: 30 Nov 2020 Location: Tadworth Posts: 223 |
That’s brilliant, I’ll give it a go, any improvement is better than what they are like now, I’m fed up of wincing and repeating myself to others to be careful when shutting the doors! 2009 (2010 MY) 5.0 Supercharged Autobiography
|
||
23rd Apr 2022 8:42am |
|
JCW Member Since: 13 Apr 2013 Location: Cotswolds Posts: 861 |
As per Ffrr-lover, I found that extending them all the way out & a thorough soaking / clean using a detergent (I used a carpet cleaning fluid as I had some to hand) then allowing to fully dry before reeling back in made a world of difference. It’s also worth removing the b pillar trim as there’s a metal bar attached to the body that the belt slides over that becomes clogged up with fluff etc and slows the belt down |
||
23rd Apr 2022 11:33am |
|
TDV8 Paul Member Since: 30 Nov 2020 Location: Tadworth Posts: 223 |
Sounds like something I need to do! Thanks 2009 (2010 MY) 5.0 Supercharged Autobiography
|
||
23rd Apr 2022 9:11pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis