I’ve had a look though other threads and struggling to find if anyone else has had the same issue with the epb. When I clear the codes with iid tool the epb can be released no problem with the centre console switch. But when I try to reapply the parking brake it automatically comes up with the parking break fault on the dash. No crunching noises when trying to apply the brake either.

Click image to enlarge

I also had some error codes that might have be connected and causing an issue. Possibly a wheel speed sensor and height sensor? I’m having a look Into the wiring diagrams and will check all the fuses to rule out the obvious. Is there a way to check the wheel sensors and suspension on the iid tool?

Maybe it's the internal temp sensor that has failed...!! Pete
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Parchment over Navy Interior. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand, Jet Interior. Sold
2002 L322 Vogue 4.4 V8 Epson Green, Ivory over Aspen Interior (Fatty Offroader) Sold
-Click for Project Fatty off roader-

That could be a possibility. Would that allow me to remove the park brake as usual but not apply it? Seems a strange fault to me that resets and doesn’t come back in until you try to apply the brake. I could be overthinking and it’s something that simple

I have read on here somewhere about the harness wiring being very stressed tight and chafing, but sorry I have been trying to search the post but can’t find it.
Someone may remember more.
Mike. G reg 2.5VM Vogue Portofino red 1991- 1999
V reg 2.5td P38 Rioja red 1999- 2006
53 reg td6 Vogue Oslo blue 2006- 2015
11 reg 4.4 TdV8 Vogue SE. Baltic blue 2015- date.
https://www.fullfatrr.com/forum/topic56162...tty+affair