Hi I just fitted new disc and pads on the rear. The EPB shoes looked ok so I left them as is. After fitting the new discs i tightened up the adjuster till they gripped then backed it off a few clicks till the disc freed up. Is there anything else I need to do or is this it... Have read about a bedding in process but not sure if it applies or how to do it as the Workshop manual I downloaded has a link to to an external site that I cant access.

Thanks all. L322 2007 TDV8 3.6

If you scroll down to the bottom of this page there's links to the workshop manual that you should be able to see.

https://www.fullfatrr.com/wiki/Main_Page

David. 2002 4.6 Vogue SE - Alveston Red with Lightstone Leather
2007 Range Rover Supercharged in Java Black with Ivory Leather
2012 Range Rover 5.0 SC Autobiography in Indus Silver with Jet/Ivory Interior
2012 Range Rover 4.4 TDV8 Autobiography in Baltic Blue with Sand Interior

Or, if you have an IIdTool, it will do it for you  Got - 2017 SDV8 Autobiography in Loire Blue
Had- 2008 TDV8 Vogue SE in Java black
Had - 2007 S/C in Stornoway Grey

dhallworth wrote:

If you scroll down to the bottom of this page there's links to the workshop manual that you should be able to see.

https://www.fullfatrr.com/wiki/Main_Page

David.

If you didn't change the EPB shoes, there's no need for the bedding process - which is more for the EPB shoes than the discs Paul,
2001 Discovery 2 TD5, 211,000 miles & climbing
2006 FFRR TDV8 Vogue 151,000 miles & now sold
Member of Midland (Land) Rover Owners Club, www.mroc.co.uk

So just tighten up the adjuster till they grip then back off a few clicks till they don't Pawl ?  L322 2007 TDV8 3.6

There is a specific quanity of clicks to back-off I think - probably to ensure the EPB applies the correct tension to the cable.
I can't remember what it was, maybe 5 or 6 - more than I was expecting when I did mine a couple of years ago.
UPDATE : It's actually 8 ! That's why I thought it was a lot !
Copy from WM :

 L322 2007 TDV8 3.6

I replaced the disks and pads earlier this year but not the EPB pads, I did have to go through the palaver of the resetting of the pads for the handbrake. not difficult but does take a bit of time and I don't think doing it in the centre of a city or town works. I did mine on a rural road, it did take about 8 or so goes to get the brakes set, it did pass an MOT so I must have done something right.

There is a good how to video on You Tube from Powerful UK Ltd - Land Rover Discovery 3 & 4 bedding in rear handbrake shoes EPB. It is for a Disco 4, but the sytem and procedure is the same for L322's.

Link:
&list=WL&index=10

Thank you SJ... L322 2007 TDV8 3.6