Hi all,

Noticed this hanging in the rear right wheel arch. Haven’t seen it before.

Sorry, photo rotates 90 degrees when I post. Can’t figure out how to fix 😐 RR Vogue 4.4 TDV8 - 11
Toyota Land Cruiser Prado - 02

LR Discovery 4 SDV6 -11 - Gone
RR Vogue 3.6 TDV8 - Gone

I may be wrong but I think that part is also used on the BMW X5 rear subframe bush assembly and has a use on that car but not on the Range Rover. Happy to be corrected if someone knows different though.

Sorry, just realised you may be referring to the hanging pipe/cable and I'm not sure what that is but could be connected to the ABS sensor connector or brake wear sensor as their connectors are found in a plastic box under the wheel arch liner around that area. 2012 Westminster TDV8 4.4 Indus Silver
GAP IID Bluetooth Tool

Previous Range Rovers:

2005 L322 Vogue SE TD6 Zambezi Silver
1995 P38A HSE Epsom Green
1988 Classic Vogue EFi Cassis Red
1973 Two Door Tuscan Blue

are you referring to the hanging cable / pipe? it could be the abs cable come out of its plastic bracket

BTW - you've got a nail in the tyre!

Just to be clear; I´m referring to the cable that is hanging down. Haven't seen it before and there isn't one on the other side?

cheers RR Vogue 4.4 TDV8 - 11
Toyota Land Cruiser Prado - 02

LR Discovery 4 SDV6 -11 - Gone
RR Vogue 3.6 TDV8 - Gone

@dexion7; aha, so just a matter of re-attaching it then?

And thanks for spotting the nail but its actually just a small stone : ) RR Vogue 4.4 TDV8 - 11
Toyota Land Cruiser Prado - 02

LR Discovery 4 SDV6 -11 - Gone
RR Vogue 3.6 TDV8 - Gone