Home > Maintenance & Mods (L322) > 2011-12 Brake Disc Shield replacement |
|
|
bwelton Member Since: 26 May 2014 Location: Milton Keynes Posts: 137 |
Does anybody know if you can replace a Brake Disk Shield without taking the Hub off ? I have seen some Brake Disc Shields on the Internet that have a section out, but these are not for the Brembo Brake 4.4 TDV8’s.
|
||
24th Apr 2022 9:25am |
|
bwelton Member Since: 26 May 2014 Location: Milton Keynes Posts: 137 |
Just found a YouTube showing it being replaced with a Disc Shield, that does not completely encircle the Hub, but I need to find if this version is available for those with the big Brembo Brakes.
|
||
24th Apr 2022 10:01am |
|
dingg1 Member Since: 29 Jun 2013 Location: PORTUGAL Posts: 1340 |
I think I may have worked offshore with that bloke, 😂😂😂😂 just threw copper slip over the top of every bolt head and hoped it was going to do something.
|
||
24th Apr 2022 10:12am |
|
mjdronfield Member Since: 04 Nov 2011 Location: Derbyshire Posts: 7799 |
Did mine before Christmas. Bought a new shield from LR. Just cut the thin bit of steel off and slide it behind the hub…. No need to touch the hub.
|
||
24th Apr 2022 12:23pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis