fullfatrr.com - View topic - How-to: Start Stop Button Replacement

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical (L322) > How-to: Start Stop Button Replacement

Page 1 of 3

Print this entire topic ·

TTB

Member Since: 31 Aug 2017
Location: Bristol
Posts: 3

2009 Range Rover Vogue SE TDV8 Zambezi Silver

How-to: Start Stop Button Replacement

My 2010MY Vogue SE has a cracked start/stop button, my local dealer wanted £290 to replace it stating that it's an expensive switch and a dash-off job. So I did what any self-respecting forum member would do and googled the hell out of the subject. I couldn't find a how-to-guide so I thought I'd take some photos as I did the job to help anyone else looking to do this repair:

I found a new genuine switch with a slightly different part number that works for £19 (LRI Solutions): LR011898

The button is slightly different but it illuminates with the correct colour. Before:

After:

Click image to enlarge

The button is held in with three clips which need to be depressed to release it from the dash panel. You can see them in the following photos, one in the centre of the bottom of the switch and the other two at 120`

I was worried about damaging the soft dash so I put a bit of masking tape around the old switch before using an electricians screw driver to pop the clips one by one starting with the bottom one:

The switch popped out easily and there is a good length of wire to allow you to test the new switch before pushing it back into place.

Click image to enlarge

Took no more than 5 minutes so I feel like I just won £270.

Hope this helps anyone else who's suffering from a cracked start/stop button

Simon

23rd Sep 2017 9:07am

stan
Site Moderator

Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 35264

thats great Simon i'll stick this in our wiki..

its known that these are easy to replace but a 'how to' is very handy ... ... - .- -.

Y. O. L. O.
.

23rd Sep 2017 9:17am

mpirie

Member Since: 26 Jun 2012
Location: In the Highlands
Posts: 898

2013 Range Rover Autobiography SDV8 Luxor

Excellent "how-to"

By my calculations, the dealer is charging £3,460 per hour (12 x 5 minutes @ £290 less £20 for parts)

Of course, this rate is used to cover the majority of faults that should have been picked up at the factory QC

Mike

23rd Sep 2017 9:27am

scotcruz

Member Since: 03 May 2017
Location: S C O T L A N D
Posts: 391

2010 Range Rover HSE TDV8 Zambezi Silver

Really good write up TTB.

I had a cracked button for a while however have recently had starting issues and alot of the threads point to a cracked button causing it to malfunction? Current:
- L560 Velar HSE R-Dynamic D180
- Peugeot 508 2011 - 2.2 HDi GT

Past:
- FFRR V 2010 - 3.6 TDV8
- Citroen C4 1.6i Petrol
- Mitsubishi Shogun 3.2 DID
- Peugeot 607 2.2 HDi
- Nissan Primera 1.8 SVE
- Honda Civic 1.6 VTEC

27th Dec 2017 8:20pm

TTB

Member Since: 31 Aug 2017
Location: Bristol
Posts: 3

Hi Scotcruz,

The part number is LR011898. It cost less than 20 quid from LRI Solutions as "old stock" but they don't have any left. But if you Google for the part number you should find somewhere. LR Direct has them for under 40 quid:

https://www.lrdirect.com/LR011898-supplied...ROVER.html

27th Dec 2017 8:28pm

scotcruz

Member Since: 03 May 2017
Location: S C O T L A N D
Posts: 391

Cheers mate.. I was gonna say that you got a real bargain there..

cheers for the link.. gonna start looking for it now.. Current:
- L560 Velar HSE R-Dynamic D180
- Peugeot 508 2011 - 2.2 HDi GT

Past:
- FFRR V 2010 - 3.6 TDV8
- Citroen C4 1.6i Petrol
- Mitsubishi Shogun 3.2 DID
- Peugeot 607 2.2 HDi
- Nissan Primera 1.8 SVE
- Honda Civic 1.6 VTEC

27th Dec 2017 9:51pm

dexion7

Member Since: 06 Jun 2013
Location: Tynemouth
Posts: 291

2010 Range Rover Vogue SE TDV8 Alaska White

excellent how to - highly recommended - Â£40 switch + 5 minutes

31st May 2018 9:39am

bertie1

Member Since: 30 Sep 2017
Location: kent
Posts: 100

2004 Range Rover Vogue Td6 Adriatic Blue

I wonder if land rover customer relations will comment ????

31st May 2018 5:05pm

roel2018

Member Since: 01 Oct 2018
Location: Aalter
Posts: 34

2011 Range Rover Vogue SE TDV8 Santorini Black

Re: How-to: Start Stop Button Replacement

Hi there,

Mine is also damaged so I need to replace this part with number LR050802 but I have 2 questions:

1. Is there a difference between LHD or RHD?
2. Do i need to re-program this part because of keyless start?
3. Will this part also fit on a 2011 Vogue TDV8 4.4.?

[img]

Thanks!
Roel[/img]

1st Oct 2018 3:00pm

haaris

Member Since: 02 Apr 2010
Location: Ballina
Posts: 33

2011 Range Rover Autobiography 4.4 V8 Orkney Grey

Should this button light up fully. only ENGINE and STOP light up. Not the START

22nd May 2019 8:27pm

haaris

Member Since: 02 Apr 2010
Location: Ballina
Posts: 33

22nd May 2019 8:29pm

nicksaab

Member Since: 28 May 2013
Location: Wimbledon and West Wales
Posts: 560

2016 Range Rover Vogue SE SDV8 Corris Grey

haaris wrote:
Should this button light up fully. only ENGINE and STOP light up. Not the START

That has always annoyed me! But yes, only engine and stop. Current Fleet:-
2018 Discovery 5 3.0 HSE
2021 Ford Ranger Wildtrack
2019 Ford Mustang Bullitt 5.0 V8
1993 Defender 90 200TDI Pickup

Gone - not forgotten
2016 L405 4.4 SDV8 Vogue SE
2012 L322 4.4 Westminster
2004 L322 4.4 V8 Autobiography LE
2000 P38 RR 4.0 HSE (ex Clarkson test car)

23rd May 2019 4:27pm

roel2018

Member Since: 01 Oct 2018
Location: Aalter
Posts: 34

Ignition start button LR050802 / late L322 models

Some extra information from my side after replacing:

Coding is not required for the facelift model TDV8 4.4. 2011. Just plug and play 5 minutes. Here is a photo from the connector when the cables are disconnected

27th May 2019 2:02pm

leusfx

Member Since: 24 Jul 2018
Location: prague
Posts: 25

Would you know how upgrade to start/stop button on FFRR TDV8 2008 when there is normal key fob?

11th Dec 2019 3:37pm

mike73

Member Since: 19 Jun 2020
Location: toronto
Posts: 3

2008 Range Rover Supercharged 4.2 SC V8 Java Black

Sorry to hi jack this thread, i have a 2008 range rover and it has the keyed starter switch in the same locations, does it come out with the same method?

19th Jun 2020 1:11pm

Page 1 of 3

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum