Home > Technical (L322) > CCF files can these be got from dealer 2006 SC |
|
|
wiggs Member Since: 29 May 2010 Location: Manchester Posts: 182 |
I would suspect its the tv in motion lead at fault ... Why don't you remove it and see if the others start working
|
||
2nd Jul 2012 9:04pm |
|
highfellzippy Member Since: 20 Aug 2011 Location: Yorkshire Posts: 153 |
where is the tv in motion lead on the earlier cars it was plugged into tv tuner but cant see it in my car anywhere 2006 touchscreen |
||
3rd Jul 2012 6:31am |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35293 |
its behind the screen i think... ... - .- -.
|
||
3rd Jul 2012 7:57am |
|
Gazellio @ Prestige Cars Member Since: 22 Jan 2010 Location: Chilterns, UK Posts: 11309 |
I think you have to get behind the screen as Stan says as I think the lead plugs into the rear then the car lead plugs into the TV in motion lead. |
||
3rd Jul 2012 8:03am |
|
Jpickie Member Since: 02 Nov 2011 Location: Oxfordshire Posts: 44 |
I have had a similar problem with my DVD player showing a blue screen and saying something like 'incorrect signal'. It turns out that when my kids have been turning off the RSE with the remote control if you hold the on / off button on the left side for too long it puts the DVD player into NTSC mode and then displays the error message. The only way to correct this is to hold the button again on the remote whilst pointing it at one of the rear screens until it returns to the normal PAL mode again. It was my understanding that the TV in motion lead for the touch screen units is located at the integrated head unit which is behind the lower glove box on a facelift and I would assume it's at the same place on pre- facelift with touchscreen. As for the reverse camera have you tried entering the test mode for the touchscreen to see if the camera is showing a picture regardless of weather it's in reverse gear. There is a write up of how to enter the test mode using the 753 hack on the WIKI pages, at least that will narrow down if your getting a picture or not. Regards Jon MY2007 S/C - Stornoway / Jet |
||
3rd Jul 2012 8:04am |
|
highfellzippy Member Since: 20 Aug 2011 Location: Yorkshire Posts: 153 |
the saga continues 7 days in dealer and counting
|
||
3rd Jul 2012 2:35pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35293 |
hang on a minute, is it not the conversion peeps that caused this problem not the dealer... ... - .- -. Y. O. L. O. . |
||
3rd Jul 2012 2:39pm |
|
DMRR Member Since: 14 Apr 2010 Location: Northamptonshire Posts: 2027 |
Indeed, TV in Motion is not a standard fit either..... I know what my dealer would say Land Rover Addict
|
||
3rd Jul 2012 2:44pm |
|
highfellzippy Member Since: 20 Aug 2011 Location: Yorkshire Posts: 153 |
What ever the problem is the so called dealer should have a answer for me by now i dont think the conversion affected it but its a possibility
|
||
3rd Jul 2012 2:46pm |
|
JustinP Member Since: 24 Oct 2010 Location: Cambridge Posts: 889 |
Have you or a previous owner fitted TV in-motion, or is the TV working when driving due to corrupt CCF?
|
||
3rd Jul 2012 7:51pm |
|
jim2RRs Member Since: 07 Feb 2012 Location: Genesee, Colorado Posts: 147 |
I think you've got that backwards. mate. Back when I worked in TV, I learned what those acronyms meant: NTSC = Never The Same Color PAL = Pale And Lurid Jim 2000 NAS HSE 2005 NAS HSE |
||
3rd Jul 2012 8:43pm |
|
SteveMFr Site Sponsor Member Since: 22 Nov 2009 Location: Strasbourg, France Posts: 1641 |
You forgot the French SECAM = System Essentially Contrary to American Method
|
||
3rd Jul 2012 9:01pm |
|
Stephen.125 Member Since: 25 Jun 2009 Location: Frodsham Posts: 1511 |
@Jim & Steve
|
||
4th Jul 2012 6:29am |
|
SteveMFr Site Sponsor Member Since: 22 Nov 2009 Location: Strasbourg, France Posts: 1641 |
It won't be an unplugged MOST fiber - if the loop is not closed MOST won't work. That is why all units on the MOST bus have 2 fiber connectors.
|
||
4th Jul 2012 8:34am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis