not familiar with the navcoder software , but if you look at the options there might be something that indicates this.. ... - .- -.




Y. O. L. O.
.

if poss try to avoid using resisters they can get very hot and i mean very hot. i have tried the new cree led's ones i bought, crap they are great in the colour range but just dont give out any light,you just end up with a round spot of light in the middle of the light unit. V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

oohh! that's a bummer...i'll stick with my 18 smd jobbys then, tbh, they give out enough light for drl's... ... - .- -.




Y. O. L. O.
.

oohh! that's a bummer...i'll stick with my 18 smd jobbys then, tbh, they give out enough light for drl's... ... - .- -.




Y. O. L. O.
.

not sure if I am missing something here....

so its right to say that if you want rid of the 'bulb' effect from the front of the FF, the only way to do this is with led lights and resistors? I am sure I read an alternative way of using led's but without the resistor? (from another forum maybe??)

If yours is pre touch screen I am sure you can turn the error message of using navcoder, the fogs do show up on the Navcoder interface. I am going to get some and thats what I plan to do. Reformed

leds/smds take less power to operate than a normal bulb so the FFRR thinks one/two bulbs are out and so shows an error and displays that, one way to solve that is by fitting resisters in parallel to the led/smd ...another method is buy leds/smds with a canbus error circuit which fools the FFRR into thinking there is a proper wattage bulb ... ... - .- -.




Y. O. L. O.
.

Quote:

another method is buy leds/smds with a canbus error circuit which fools the FFRR into thinking there is a proper wattage bulb

Yeh its these canbus ones I've read about, anyone a suggestion / recommendation, last time I looked on the bay, there were loads of em

depends what bulbs you want to replace, but try ebay or hids4u .. ... - .- -.




Y. O. L. O.
.

Quote:

depends what bulbs you want to replace

they'll do the job phil...tbh if you don't mind the 2/3 second flicker on start up you could get the normal ones... ... - .- -.




Y. O. L. O.
.

Will somebody be so kind as to post the bulb types for each upgrade please?. H7 for the fogs etc, my book doesnt list them like this and i have to tell hids-direct what i want so he can do me a deal. Dont want to order a fitment that doesnt work or is too bright, he suggested 8 SMD LED's for the side lights suggesting that his 5 SMD would be too blue.

Hope its not too much trouble, the bulbs id like to do initially are, fogs, side lights, number plates and interior.

Thanks

Carl

http://www.autobulbsdirect.co.uk/custom_mo...master.php in the interests of impartiality, other bulb suppliers are available

[img]http://www.flickr.com/photos/44875651@N03/6250711203/[/img]

What about the front fog lights, will the H11 LED CREE projector type bulbs be suitable or is it better just to get HID Xenon white bulbs?