Good evening folks,

I need some help from an owner of a 2007-2009 L322 whom also had diagnostics capable of live data (IID tool, Autel, JLR SDD etc)

At standstill with the engine running please could you look at the following:

BPM (body processor module>live data>servo valve current and servo pulse width modulation.

I will be eternally greatful to whoever can provide this info. (I.e. the amps and duty cycle % that is sent to the servotronic valve on the steering rack with the car running and at standstill)

Thanks in advance, MW.

Can anyone help me out with this?

Without this data I cannot know if it's normal or not to see 0ma and 0% on diagnostics.