Hi all!
I have purchased a very clever front number plate frame with a 7800LM led bar integrated in it. I'm fitting it to my 2007 vogue. Does anyone know where it would be easy to tap into the high-beam-on signal? I.e. which harness to unwrap and colour code of the correct wire?

Kind regards,
Henrik

Is that the new Lazer Lamps Glide? Had been thinking about buying one.

It's made by someone called Strands. I believe it is a Swedish brand, so possibly not widely available in UK. Although it probably is, under a different brand name...
?si=sAreNb2HeDH4IZUz

a quick google came up with this,



https://www.kudauk.ltd.uk/product/strands-...te-led-bar




other UK companys probably do these.. ... - .- -.




Y. O. L. O.
.

Nice product ,I would like one on my car, then I had a thought, would this be legal in the UK
As with the plate LED lights on, various traffic cameras that photograph the front of the car may not work properly. Obviously I would never condone such actions

Successfully installed. Makes a huge difference.
I pulled the RH headlamp and beeped my way from the high-beam bulb to the connector and identified two pins. Found my way to the corresponding two holes in the female connector on the harness and identified one as a permanent ground, which makes the other one a switched positive. This was a blue/yellow wire. Tapped into that for the switch signal. Works like a charm.