2004 car - just used the IID to scan for any errors/faults, most of them I can work out, but one of them seems to be fairly uncommon - with no resolution

BPM Body Processor v10 0x38 Open Circuit Activation SRA DRM 2 DS2 1 Fault


Have searched on here, and googled, but am none the wiser, just posting here in case anyone can shed some light on it, thanks

Is this thread no longer monitored by the good people at GAP ??

Hi all. I'm trying to find the live value settings within my IID Gap tool for my air compressor and can not. At present time the Gap tool states that it has an Hitachi compressor fitted, but I have noticed at some point in time someone has replaced it with an Arnott compressor that is modelled of the AMK Compressor.
My question is do you think I can't see the live values because maybe I should select within the settings that it has an AMK compressor fitted? I'm a little hesitant in re-flashing for AMK as it states in doing so it "MAY" render the car inoperable.
Just a foot note, at the moment the air suspension is all working fine, I just would like to see the live values for the compressor.

Many thanks, Paul. 2010 RR Autobiography 5.0 SC
2020 F-Pace SVR 5.0 SC
2018 RRS HSE Dynamic 3.0
2014 Disco XXV
2011 Disco 3.0
2009 RRS HST V8

Just thought I would try again to see if anyone had any ideas on my above post.  2010 RR Autobiography 5.0 SC
2020 F-Pace SVR 5.0 SC
2018 RRS HSE Dynamic 3.0
2014 Disco XXV
2011 Disco 3.0
2009 RRS HST V8

i have no idea but you could email Pat @ GAP for an answer.. ... - .- -.




Y. O. L. O.
.

I have a new to me, 2012 L322 with Auxiliary heater with remote. And a new to me iiD tool.

If I use the remote, the internal fan on the car starts, but no heat.

Can I use the iiD tool to see all the live values for the system to see which bit isn’t working?

Thanks.

Just bought a 2025 FF l460 and would like to know what the GAP took can help with?

Would like to set the auto start/stop to off and have the car remember the last setting such as off or on and also have the drivers assist settings remembered?

Look forward to any advice/replies  "UNDERSTEER" ----is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" ----is how fast you hit the fence.
"TORQUE" -----------is how far you take the fence with you.